On 10/22/2017 10:28 PM, Zoltan HERPAI wrote: > Hi, > > Zoltan HERPAI wrote: >> Hi Hauke, >> >> On Sun, 22 Oct 2017, Hauke Mehrtens wrote: >> >>> I am working on merging the missing commits from the OpenWrt git >>> repository into the LEDE repository. >>> >>> Here is a list of all non merge commits from the OpenWrt git repository >>> and their corresponding LEDE commit IDs: >>> https://github.com/hauke/openwrt-lede-merge/blob/master/commits.csv >>> >>> I only looked into the non merge commits and assumed that commits with >>> the same title are the same, if this is wrong please point me to some >>> place where this causes problems. >>> >>> I used this script to generate the csv table: >>> https://github.com/hauke/openwrt-lede-merge/blob/master/openwrt-merge.py >>> >>> The bigger topics I see are: >>> * addition of SoCFPGA target with kernel 4.4 support >>> * Will someone port this to kernel 4.9 or provide me with hardware so I >>> can try to port this and test it? >>> * There are some commits without a Signed-off-by line, I will contact >>> the authors. >>> * The realview target was removed from LEDE, but it got an update to >>> kernel 4.4 in OpenWrt, how do we want to handle this? Does anyone need >>> the realview target? >> >> As discussed earlier, I've prepared manually a list of commits that >> are missing from LEDE. I was about to send: >> >> - a set of patches that probably don't need any discussion and can be >> merged right away, >> - a set of patches that are RFC, and should be discussed. >> >> Let me know if that should still happen. > The series has been sent as discussed on irc. I don't recall any more > required - also based on checking the CSV, thanks for prepping that. > > The RFC patches/PRs are: > > ---- > - https://github.com/openwrt/openwrt/pull/433 > I'd like to add genimage support to OpenWrt. With this package one can > create arbitrary image either for internal flash or SD/USB storage devices. > As this package is basically applicable to any target should I enable it > in tools/Makefile tools-y target? > > - https://github.com/openwrt/openwrt/pull/409 > Add nconfig toplevel target to utilize ncurses ui configuration utility > as found on kernel's buildsystem.
There is also a pull open request for LEDE: https://github.com/lede-project/source/pull/903 > - https://github.com/openwrt/openwrt/pull/533 > tools: add package autoconf-archive There is also a open pull request for LEDE: https://github.com/lede-project/source/pull/1368 > - https://github.com/openwrt/openwrt/pull/464 > Add full control of network configuration to a user script #464 > > - https://github.com/openwrt/openwrt/pull/312 > ar71xx: add support for Zsun WiFi SD Card Reader This is missing a Singed-of-by line > https://github.com/openwrt/openwrt/commit/4f997727aef0603f02e9320ba787ea1b894747c0 > > lantiq: td-w8980: fix failsafe mode via ethernet. This looks correct to me, but I do not have this board. > https://github.com/openwrt/openwrt/commit/9fb1348a0aa8954535ec5a2c088037af0d7b9297 > > packages: lzo: Update LZO Makefile to repair dead Main URL For me also the old URL works, this was probably only temporary, we should add both URLs to the build system. > - https://github.com/openwrt/openwrt/pull/539 > Add TL-WA901v5 support The GCC 7 patches are probably already in, but the target commit looks ok to me, but I am not a ar71xx expert. > ---- > > - #1-4 would require discussion if they're needed at all, they look as > "nice to have". > - #5 needs some work as it has some dirty hacks. This can be taken care > on the summit's second day - I recall someone going there has a ZSun reader > - #6 - I haven't seen traces of this in LEDE, but I leave it to the > lantiq experts to opinion on > - #7 was due to an outage if I recall correctly, again, it's optional > - #8 - needs some further changes around creating the -factory image > > Regards, > -w- What about the SoCFPGA target? https://github.com/openwrt/openwrt/tree/master/target/linux/socfpga I think they should submit it again with kernel 4.9 support. Hauke _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
