I'll take a look at what can be done with the `wifi` script. I think it's pretty long overdue with IoT modules being huge now. On 28 Apr 2016 20:23, "Piotr Dymacz" <pep...@gmail.com> wrote:
> Hello, > > 2016-04-28 13:12 GMT+02:00 Andrew Yong <m...@ndoo.sg>: > [...] > > > Many SOM modules and mini routers (and the Zsun card reader > > https://wiki.hackerspace.pl/projects:zsun-wifi-card-reader) don't have > > Ethernet ports and manufacturers ship custom OpenWrt with preconfigured > WiFi > > for this, and probably will never be supported by OpenWrt releases > because > > of how wifi-detect disables WiFi by default. > > Fully agree. > There are other interesting devices, like D-Link DCH-M225 (MT7620A + > audio) [1]. > > I know only one way how to use such devices with OpenWrt: define > hardware button as rfkill and use it after flash. > > Cheers, > Piotr > > [1] https://wikidevi.com/wiki/D-Link_DCH-M225_rev_A1 > > > > > On 28 Apr 2016 18:48, "＠SRCHACK.ORG" <tochiro.srch...@gmail.com> wrote: > >> > >> Hi, Dear Piotr. > >> > >> Status quo, is the only way there is access in the UART. > >> Looking for a good way. I'm thinking. > >> > >> > >> On 2016/04/28 19:24, Piotr Dymacz wrote: > >>> > >>> Hello YuheiOKAWA, > >>> > >>> Just small question. > >>> How the user can access the device if it doesn't have Ethernet and the > >>> WiFi is disabled by default in OpenWrt? > >>> > >>> Cheers, > >>> Piotr > >>> > >>> > >>> 2016-04-28 11:49 GMT+02:00 YuheiOKAWA <tochiro.srch...@gmail.com>: > >>>> > >>>> add support for Planex MZK-EX750NP. > >>>> MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater. > >>>> Built-in power supply. > >>>> 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. > >>>> > >>>> Signed-off-by: YuheiOKAWA <tochiro.srch...@gmail.com> > >>>> --- > >>>> target/linux/ramips/base-files/etc/board.d/01_leds | 4 + > >>>> .../linux/ramips/base-files/etc/board.d/02_network | 1 + > >>>> target/linux/ramips/base-files/etc/diag.sh | 3 +- > >>>> target/linux/ramips/base-files/lib/ramips.sh | 3 + > >>>> .../ramips/base-files/lib/upgrade/platform.sh | 1 + > >>>> target/linux/ramips/dts/MZK-EX750NP.dts | 150 > >>>> +++++++++++++++++++++ > >>>> target/linux/ramips/image/mt7620.mk | 2 + > >>>> target/linux/ramips/mt7620/profiles/planex.mk | 11 ++ > >>>> 8 files changed, 174 insertions(+), 1 deletion(-) > >>>> create mode 100644 target/linux/ramips/dts/MZK-EX750NP.dts > >>>> > >>>> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds > >>>> b/target/linux/ramips/base-files/etc/board.d/01_leds > >>>> index aeaab33..47e1e6a 100755 > >>>> --- a/target/linux/ramips/base-files/etc/board.d/01_leds > >>>> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds > >>>> @@ -206,6 +206,10 @@ mr-102n) > >>>> set_wifi_led "$board:green:wlan" > >>>> set_usb_led "$board:green:usb" > >>>> ;; > >>>> +mzk-ex750np) > >>>> + ucidef_set_led_default "power" "power" "$board:red:power" "1" > >>>> + set_wifi_led "$board:red:wifi" > >>>> + ;; > >>>> na930) > >>>> set_usb_led "$board:blue:status" > >>>> ;; > >>>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network > >>>> b/target/linux/ramips/base-files/etc/board.d/02_network > >>>> index c6c740f..ee690f6 100755 > >>>> --- a/target/linux/ramips/base-files/etc/board.d/02_network > >>>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network > >>>> @@ -165,6 +165,7 @@ ramips_setup_interfaces() > >>>> d105|\ > >>>> hpm|\ > >>>> mzk-ex300np|\ > >>>> + mzk-ex750np|\ > >>>> na930|\ > >>>> wli-tx4-ag300n|\ > >>>> wrh-300cr) > >>>> diff --git a/target/linux/ramips/base-files/etc/diag.sh > >>>> b/target/linux/ramips/base-files/etc/diag.sh > >>>> index 20ff8ff..c638d16 100644 > >>>> --- a/target/linux/ramips/base-files/etc/diag.sh > >>>> +++ b/target/linux/ramips/base-files/etc/diag.sh > >>>> @@ -41,7 +41,8 @@ get_status_led() { > >>>> hlk-rm04|\ > >>>> jhr-n825r|\ > >>>> mpr-a1|\ > >>>> - mpr-a2) > >>>> + mpr-a2|\ > >>>> + mzk-ex750np) > >>>> status_led="$board:red:power" > >>>> ;; > >>>> ai-br100|\ > >>>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh > >>>> b/target/linux/ramips/base-files/lib/ramips.sh > >>>> index 2c669c5..0ac0f68 100755 > >>>> --- a/target/linux/ramips/base-files/lib/ramips.sh > >>>> +++ b/target/linux/ramips/base-files/lib/ramips.sh > >>>> @@ -298,6 +298,9 @@ ramips_board_detect() { > >>>> *"MZK-EX300NP") > >>>> name="mzk-ex300np" > >>>> ;; > >>>> + *"MZK-EX750NP") > >>>> + name="mzk-ex750np" > >>>> + ;; > >>>> *"MZK-W300NH2"*) > >>>> name="mzk-w300nh2" > >>>> ;; > >>>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh > >>>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh > >>>> index 2b24030..86ea4a3 100755 > >>>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh > >>>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh > >>>> @@ -90,6 +90,7 @@ platform_check_image() { > >>>> mzk-750dhp|\ > >>>> mzk-dp150n|\ > >>>> mzk-ex300np|\ > >>>> + mzk-ex750np|\ > >>>> mzk-w300nh2|\ > >>>> mzk-wdpr|\ > >>>> nbg-419n|\ > >>>> diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts > >>>> b/target/linux/ramips/dts/MZK-EX750NP.dts > >>>> new file mode 100644 > >>>> index 0000000..9b5b418 > >>>> --- /dev/null > >>>> +++ b/target/linux/ramips/dts/MZK-EX750NP.dts > >>>> @@ -0,0 +1,150 @@ > >>>> +/dts-v1/; > >>>> + > >>>> +/include/ "mt7620a.dtsi" > >>>> + > >>>> +/ { > >>>> + compatible = "ralink,mt7620a-soc"; > >>>> + model = "Planex MZK-EX750NP"; > >>>> + > >>>> + palmbus@10000000 { > >>>> + gpio2: gpio@660 { > >>>> + status = "okay"; > >>>> + }; > >>>> + > >>>> + gpio3: gpio@688 { > >>>> + status = "okay"; > >>>> + }; > >>>> + > >>>> + spi@b00 { > >>>> + status = "okay"; > >>>> + > >>>> + m25p80@0 { > >>>> + #address-cells = <1>; > >>>> + #size-cells = <1>; > >>>> + compatible = "jedec,spi-nor"; > >>>> + reg = <0 0>; > >>>> + linux,modalias = "m25p80", "w25q64"; > >>>> + spi-max-frequency = <10000000>; > >>>> + > >>>> + partition@0 { > >>>> + label = "u-boot"; > >>>> + reg = <0x0 0x30000>; > >>>> + read-only; > >>>> + }; > >>>> + > >>>> + partition@30000 { > >>>> + label = "u-boot-env"; > >>>> + reg = <0x30000 0x10000>; > >>>> + read-only; > >>>> + }; > >>>> + > >>>> + factory: partition@40000 { > >>>> + label = "factory"; > >>>> + reg = <0x40000 0x10000>; > >>>> + read-only; > >>>> + }; > >>>> + > >>>> + partition@50000 { > >>>> + label = "firmware"; > >>>> + reg = <0x50000 0x730000>; > >>>> + }; > >>>> + > >>>> + partition@780000 { > >>>> + label = "Udata"; > >>>> + reg = <0x780000 0x80000>; > >>>> + }; > >>>> + }; > >>>> + }; > >>>> + }; > >>>> + > >>>> + pinctrl { > >>>> + state_default: pinctrl0 { > >>>> + gpio { > >>>> + ralink,group = "uartf", "nd_sd", > >>>> "rgmii2", "wled"; > >>>> + ralink,function = "gpio"; > >>>> + }; > >>>> + }; > >>>> + }; > >>>> + > >>>> + ethernet@10100000 { > >>>> + pinctrl-names = "default"; > >>>> + pinctrl-0 = <&ephy_pins>; > >>>> + mtd-mac-address = <&factory 0x4>; > >>>> + mediatek,portmap = "llllw"; > >>>> + }; > >>>> + > >>>> + wmac@10180000 { > >>>> + ralink,mtd-eeprom = <&factory 0>; > >>>> + }; > >>>> + > >>>> + pcie@10140000 { > >>>> + status = "okay"; > >>>> + > >>>> + pcie-bridge { > >>>> + mt76@0,0 { > >>>> + reg = <0x0000 0 0 0 0>; > >>>> + device_type = "pci"; > >>>> + mediatek,mtd-eeprom = <&factory > 0x8000>; > >>>> + mediatek,2ghz = <0>; > >>>> + }; > >>>> + }; > >>>> + }; > >>>> + > >>>> + gpio-leds { > >>>> + compatible = "gpio-leds"; > >>>> + > >>>> + power { > >>>> + label = "mzk-ex750np:red:power"; > >>>> + gpios = <&gpio0 14 1>; > >>>> + }; > >>>> + > >>>> + wifi { > >>>> + label = "mzk-ex750np:red:wifi"; > >>>> + gpios = <&gpio3 0 1>; > >>>> + }; > >>>> + > >>>> + wps { > >>>> + label = "mzk-ex750np:green:wps"; > >>>> + gpios = <&gpio0 10 1>; > >>>> + }; > >>>> + > >>>> + rep { > >>>> + label = "mzk-ex750np:blue:rep"; > >>>> + gpios = <&gpio2 16 1>; > >>>> + }; > >>>> + > >>>> + wifi1 { > >>>> + label = "mzk-ex750np:blue:wifi1"; > >>>> + gpios = <&gpio2 19 1>; > >>>> + }; > >>>> + > >>>> + wifi2 { > >>>> + label = "mzk-ex750np:blue:wifi2"; > >>>> + gpios = <&gpio2 18 1>; > >>>> + }; > >>>> + > >>>> + wifi3 { > >>>> + label = "mzk-ex750np:blue:wifi3"; > >>>> + gpios = <&gpio2 17 1>; > >>>> + }; > >>>> + }; > >>>> + > >>>> + gpio-keys-polled { > >>>> + compatible = "gpio-keys-polled"; > >>>> + #address-cells = <1>; > >>>> + #size-cells = <0>; > >>>> + poll-interval = <20>; > >>>> + > >>>> + reset { > >>>> + label = "reset"; > >>>> + gpios = <&gpio0 9 1>; > >>>> + linux,code = <0x198>; > >>>> + }; > >>>> + > >>>> + wps { > >>>> + label = "wps"; > >>>> + gpios = <&gpio0 13 0>; > >>>> + linux,code = <0x211>; > >>>> + }; > >>>> + }; > >>>> +}; > >>>> diff --git a/target/linux/ramips/image/mt7620.mk > >>>> b/target/linux/ramips/image/mt7620.mk > >>>> index 35cb46a..09c0ec2 100644 > >>>> --- a/target/linux/ramips/image/mt7620.mk > >>>> +++ b/target/linux/ramips/image/mt7620.mk > >>>> @@ -102,6 +102,7 @@ Image/Build/Profile/NA930=$(call > >>>> BuildFirmware/CustomFlash/$(1),$(1),na930,NA930 > >>>> Image/Build/Profile/DB-WRT01=$(call > >>>> BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01) > >>>> Image/Build/Profile/MZK-750DHP=$(call > >>>> BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) > >>>> Image/Build/Profile/MZK-EX300NP=$(call > >>>> BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP) > >>>> +Image/Build/Profile/MZK-EX750NP=$(call > >>>> BuildFirmware/Default8M/$(1),$(1),mzk-ex750np,MZK-EX750NP) > >>>> Image/Build/Profile/HC5661=$(call > >>>> BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661) > >>>> Image/Build/Profile/HC5761=$(call > >>>> BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761) > >>>> Image/Build/Profile/HC5861=$(call > >>>> BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861) > >>>> @@ -149,6 +150,7 @@ define Image/Build/Profile/Default > >>>> $(call Image/Build/Profile/DB-WRT01,$(1)) > >>>> $(call Image/Build/Profile/MZK-750DHP,$(1)) > >>>> $(call Image/Build/Profile/MZK-EX300NP,$(1)) > >>>> + $(call Image/Build/Profile/MZK-EX750NP,$(1)) > >>>> $(call Image/Build/Profile/NA930,$(1)) > >>>> $(call Image/Build/Profile/HC5661,$(1)) > >>>> $(call Image/Build/Profile/HC5761,$(1)) > >>>> diff --git a/target/linux/ramips/mt7620/profiles/planex.mk > >>>> b/target/linux/ramips/mt7620/profiles/planex.mk > >>>> index 157cf8d..f461aeb 100644 > >>>> --- a/target/linux/ramips/mt7620/profiles/planex.mk > >>>> +++ b/target/linux/ramips/mt7620/profiles/planex.mk > >>>> @@ -39,3 +39,14 @@ define Profile/MZK-EX300NP/Description > >>>> Package set optimized for the Planex MZK-EX300NP. > >>>> endef > >>>> $(eval $(call Profile,MZK-EX300NP)) > >>>> + > >>>> + > >>>> +define Profile/MZK-EX750NP > >>>> + NAME:=Planex MZK-EX750NP > >>>> + PACKAGES:= kmod-mt76 kmod-mt7610e > >>>> +endef > >>>> + > >>>> +define Profile/MZK-EX750NP/Description > >>>> + Package set optimized for the Planex MZK-EX750NP. > >>>> +endef > >>>> +$(eval $(call Profile,MZK-EX750NP)) > >>>> -- > >>>> 1.9.1 > >>>> _______________________________________________ > >>>> openwrt-devel mailing list > >>>> openwrt-devel@lists.openwrt.org > >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >>> > >>> > >> > >> > >> -- > >> ------------------------------------------------------ > >> ＠SRCHACK.ORG > >> tochiro.srch...@gmail.com > >> http://www.srchack.org/ > >> ------------------------------------------------------ > >> _______________________________________________ > >> openwrt-devel mailing list > >> openwrt-devel@lists.openwrt.org > >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
