Hello, 2016-04-28 13:12 GMT+02:00 Andrew Yong <m...@ndoo.sg>: [...]
> Many SOM modules and mini routers (and the Zsun card reader > https://wiki.hackerspace.pl/projects:zsun-wifi-card-reader) don't have > Ethernet ports and manufacturers ship custom OpenWrt with preconfigured WiFi > for this, and probably will never be supported by OpenWrt releases because > of how wifi-detect disables WiFi by default. Fully agree. There are other interesting devices, like D-Link DCH-M225 (MT7620A + audio) [1]. I know only one way how to use such devices with OpenWrt: define hardware button as rfkill and use it after flash. Cheers, Piotr [1] https://wikidevi.com/wiki/D-Link_DCH-M225_rev_A1 > > On 28 Apr 2016 18:48, "＠SRCHACK.ORG" <tochiro.srch...@gmail.com> wrote: >> >> Hi, Dear Piotr. >> >> Status quo, is the only way there is access in the UART. >> Looking for a good way. I'm thinking. >> >> >> On 2016/04/28 19:24, Piotr Dymacz wrote: >>> >>> Hello YuheiOKAWA, >>> >>> Just small question. >>> How the user can access the device if it doesn't have Ethernet and the >>> WiFi is disabled by default in OpenWrt? >>> >>> Cheers, >>> Piotr >>> >>> >>> 2016-04-28 11:49 GMT+02:00 YuheiOKAWA <tochiro.srch...@gmail.com>: >>>> >>>> add support for Planex MZK-EX750NP. >>>> MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater. >>>> Built-in power supply. >>>> 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. >>>> >>>> Signed-off-by: YuheiOKAWA <tochiro.srch...@gmail.com> >>>> --- >>>> target/linux/ramips/base-files/etc/board.d/01_leds | 4 + >>>> .../linux/ramips/base-files/etc/board.d/02_network | 1 + >>>> target/linux/ramips/base-files/etc/diag.sh | 3 +- >>>> target/linux/ramips/base-files/lib/ramips.sh | 3 + >>>> .../ramips/base-files/lib/upgrade/platform.sh | 1 + >>>> target/linux/ramips/dts/MZK-EX750NP.dts | 150 >>>> +++++++++++++++++++++ >>>> target/linux/ramips/image/mt7620.mk | 2 + >>>> target/linux/ramips/mt7620/profiles/planex.mk | 11 ++ >>>> 8 files changed, 174 insertions(+), 1 deletion(-) >>>> create mode 100644 target/linux/ramips/dts/MZK-EX750NP.dts >>>> >>>> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds >>>> b/target/linux/ramips/base-files/etc/board.d/01_leds >>>> index aeaab33..47e1e6a 100755 >>>> --- a/target/linux/ramips/base-files/etc/board.d/01_leds >>>> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds >>>> @@ -206,6 +206,10 @@ mr-102n) >>>> set_wifi_led "$board:green:wlan" >>>> set_usb_led "$board:green:usb" >>>> ;; >>>> +mzk-ex750np) >>>> + ucidef_set_led_default "power" "power" "$board:red:power" "1" >>>> + set_wifi_led "$board:red:wifi" >>>> + ;; >>>> na930) >>>> set_usb_led "$board:blue:status" >>>> ;; >>>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network >>>> b/target/linux/ramips/base-files/etc/board.d/02_network >>>> index c6c740f..ee690f6 100755 >>>> --- a/target/linux/ramips/base-files/etc/board.d/02_network >>>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network >>>> @@ -165,6 +165,7 @@ ramips_setup_interfaces() >>>> d105|\ >>>> hpm|\ >>>> mzk-ex300np|\ >>>> + mzk-ex750np|\ >>>> na930|\ >>>> wli-tx4-ag300n|\ >>>> wrh-300cr) >>>> diff --git a/target/linux/ramips/base-files/etc/diag.sh >>>> b/target/linux/ramips/base-files/etc/diag.sh >>>> index 20ff8ff..c638d16 100644 >>>> --- a/target/linux/ramips/base-files/etc/diag.sh >>>> +++ b/target/linux/ramips/base-files/etc/diag.sh >>>> @@ -41,7 +41,8 @@ get_status_led() { >>>> hlk-rm04|\ >>>> jhr-n825r|\ >>>> mpr-a1|\ >>>> - mpr-a2) >>>> + mpr-a2|\ >>>> + mzk-ex750np) >>>> status_led="$board:red:power" >>>> ;; >>>> ai-br100|\ >>>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh >>>> b/target/linux/ramips/base-files/lib/ramips.sh >>>> index 2c669c5..0ac0f68 100755 >>>> --- a/target/linux/ramips/base-files/lib/ramips.sh >>>> +++ b/target/linux/ramips/base-files/lib/ramips.sh >>>> @@ -298,6 +298,9 @@ ramips_board_detect() { >>>> *"MZK-EX300NP") >>>> name="mzk-ex300np" >>>> ;; >>>> + *"MZK-EX750NP") >>>> + name="mzk-ex750np" >>>> + ;; >>>> *"MZK-W300NH2"*) >>>> name="mzk-w300nh2" >>>> ;; >>>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh >>>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh >>>> index 2b24030..86ea4a3 100755 >>>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh >>>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh >>>> @@ -90,6 +90,7 @@ platform_check_image() { >>>> mzk-750dhp|\ >>>> mzk-dp150n|\ >>>> mzk-ex300np|\ >>>> + mzk-ex750np|\ >>>> mzk-w300nh2|\ >>>> mzk-wdpr|\ >>>> nbg-419n|\ >>>> diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts >>>> b/target/linux/ramips/dts/MZK-EX750NP.dts >>>> new file mode 100644 >>>> index 0000000..9b5b418 >>>> --- /dev/null >>>> +++ b/target/linux/ramips/dts/MZK-EX750NP.dts >>>> @@ -0,0 +1,150 @@ >>>> +/dts-v1/; >>>> + >>>> +/include/ "mt7620a.dtsi" >>>> + >>>> +/ { >>>> + compatible = "ralink,mt7620a-soc"; >>>> + model = "Planex MZK-EX750NP"; >>>> + >>>> + palmbus@10000000 { >>>> + gpio2: gpio@660 { >>>> + status = "okay"; >>>> + }; >>>> + >>>> + gpio3: gpio@688 { >>>> + status = "okay"; >>>> + }; >>>> + >>>> + spi@b00 { >>>> + status = "okay"; >>>> + >>>> + m25p80@0 { >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + compatible = "jedec,spi-nor"; >>>> + reg = <0 0>; >>>> + linux,modalias = "m25p80", "w25q64"; >>>> + spi-max-frequency = <10000000>; >>>> + >>>> + partition@0 { >>>> + label = "u-boot"; >>>> + reg = <0x0 0x30000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@30000 { >>>> + label = "u-boot-env"; >>>> + reg = <0x30000 0x10000>; >>>> + read-only; >>>> + }; >>>> + >>>> + factory: partition@40000 { >>>> + label = "factory"; >>>> + reg = <0x40000 0x10000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@50000 { >>>> + label = "firmware"; >>>> + reg = <0x50000 0x730000>; >>>> + }; >>>> + >>>> + partition@780000 { >>>> + label = "Udata"; >>>> + reg = <0x780000 0x80000>; >>>> + }; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> + pinctrl { >>>> + state_default: pinctrl0 { >>>> + gpio { >>>> + ralink,group = "uartf", "nd_sd", >>>> "rgmii2", "wled"; >>>> + ralink,function = "gpio"; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> + ethernet@10100000 { >>>> + pinctrl-names = "default"; >>>> + pinctrl-0 = <&ephy_pins>; >>>> + mtd-mac-address = <&factory 0x4>; >>>> + mediatek,portmap = "llllw"; >>>> + }; >>>> + >>>> + wmac@10180000 { >>>> + ralink,mtd-eeprom = <&factory 0>; >>>> + }; >>>> + >>>> + pcie@10140000 { >>>> + status = "okay"; >>>> + >>>> + pcie-bridge { >>>> + mt76@0,0 { >>>> + reg = <0x0000 0 0 0 0>; >>>> + device_type = "pci"; >>>> + mediatek,mtd-eeprom = <&factory 0x8000>; >>>> + mediatek,2ghz = <0>; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> + gpio-leds { >>>> + compatible = "gpio-leds"; >>>> + >>>> + power { >>>> + label = "mzk-ex750np:red:power"; >>>> + gpios = <&gpio0 14 1>; >>>> + }; >>>> + >>>> + wifi { >>>> + label = "mzk-ex750np:red:wifi"; >>>> + gpios = <&gpio3 0 1>; >>>> + }; >>>> + >>>> + wps { >>>> + label = "mzk-ex750np:green:wps"; >>>> + gpios = <&gpio0 10 1>; >>>> + }; >>>> + >>>> + rep { >>>> + label = "mzk-ex750np:blue:rep"; >>>> + gpios = <&gpio2 16 1>; >>>> + }; >>>> + >>>> + wifi1 { >>>> + label = "mzk-ex750np:blue:wifi1"; >>>> + gpios = <&gpio2 19 1>; >>>> + }; >>>> + >>>> + wifi2 { >>>> + label = "mzk-ex750np:blue:wifi2"; >>>> + gpios = <&gpio2 18 1>; >>>> + }; >>>> + >>>> + wifi3 { >>>> + label = "mzk-ex750np:blue:wifi3"; >>>> + gpios = <&gpio2 17 1>; >>>> + }; >>>> + }; >>>> + >>>> + gpio-keys-polled { >>>> + compatible = "gpio-keys-polled"; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + poll-interval = <20>; >>>> + >>>> + reset { >>>> + label = "reset"; >>>> + gpios = <&gpio0 9 1>; >>>> + linux,code = <0x198>; >>>> + }; >>>> + >>>> + wps { >>>> + label = "wps"; >>>> + gpios = <&gpio0 13 0>; >>>> + linux,code = <0x211>; >>>> + }; >>>> + }; >>>> +}; >>>> diff --git a/target/linux/ramips/image/mt7620.mk >>>> b/target/linux/ramips/image/mt7620.mk >>>> index 35cb46a..09c0ec2 100644 >>>> --- a/target/linux/ramips/image/mt7620.mk >>>> +++ b/target/linux/ramips/image/mt7620.mk >>>> @@ -102,6 +102,7 @@ Image/Build/Profile/NA930=$(call >>>> BuildFirmware/CustomFlash/$(1),$(1),na930,NA930 >>>> Image/Build/Profile/DB-WRT01=$(call >>>> BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01) >>>> Image/Build/Profile/MZK-750DHP=$(call >>>> BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) >>>> Image/Build/Profile/MZK-EX300NP=$(call >>>> BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP) >>>> +Image/Build/Profile/MZK-EX750NP=$(call >>>> BuildFirmware/Default8M/$(1),$(1),mzk-ex750np,MZK-EX750NP) >>>> Image/Build/Profile/HC5661=$(call >>>> BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661) >>>> Image/Build/Profile/HC5761=$(call >>>> BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761) >>>> Image/Build/Profile/HC5861=$(call >>>> BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861) >>>> @@ -149,6 +150,7 @@ define Image/Build/Profile/Default >>>> $(call Image/Build/Profile/DB-WRT01,$(1)) >>>> $(call Image/Build/Profile/MZK-750DHP,$(1)) >>>> $(call Image/Build/Profile/MZK-EX300NP,$(1)) >>>> + $(call Image/Build/Profile/MZK-EX750NP,$(1)) >>>> $(call Image/Build/Profile/NA930,$(1)) >>>> $(call Image/Build/Profile/HC5661,$(1)) >>>> $(call Image/Build/Profile/HC5761,$(1)) >>>> diff --git a/target/linux/ramips/mt7620/profiles/planex.mk >>>> b/target/linux/ramips/mt7620/profiles/planex.mk >>>> index 157cf8d..f461aeb 100644 >>>> --- a/target/linux/ramips/mt7620/profiles/planex.mk >>>> +++ b/target/linux/ramips/mt7620/profiles/planex.mk >>>> @@ -39,3 +39,14 @@ define Profile/MZK-EX300NP/Description >>>> Package set optimized for the Planex MZK-EX300NP. >>>> endef >>>> $(eval $(call Profile,MZK-EX300NP)) >>>> + >>>> + >>>> +define Profile/MZK-EX750NP >>>> + NAME:=Planex MZK-EX750NP >>>> + PACKAGES:= kmod-mt76 kmod-mt7610e >>>> +endef >>>> + >>>> +define Profile/MZK-EX750NP/Description >>>> + Package set optimized for the Planex MZK-EX750NP. >>>> +endef >>>> +$(eval $(call Profile,MZK-EX750NP)) >>>> -- >>>> 1.9.1 >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >>> >> >> >> -- >> ------------------------------------------------------ >> ＠SRCHACK.ORG >> tochiro.srch...@gmail.com >> http://www.srchack.org/ >> ------------------------------------------------------ >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
