From: Sven Eckelmann <sven.eckelm...@open-mesh.com>
The ag71xx driver must know which GMAC is is currently handling to enable
some special workarounds for this GMAC. GMAC0 has some registers on
QCA9558 which GMAC1 doesn't have.
Signed-off-by: Sven Eckelmann <sven.eckelm...@open-mesh.com>
---
v2:
- Split into multiple patches and adjust slightly to look more like an
OpenWrt patch
target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c | 1 +
.../ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h | 2 ++
2 files changed, 3 insertions(+)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
index 09201c9..bfcc82f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -871,6 +871,7 @@ void __init ath79_register_eth(unsigned int id)
pdata->max_frame_len = 1540;
pdata->desc_pktlen_mask = 0xfff;
+ pdata->gmac_num = id;
err = ath79_setup_phy_if_mode(id, pdata);
if (err) {
diff --git
a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
index 4db2c65..5e4edae 100644
---
a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
+++
b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
@@ -38,6 +38,8 @@ struct ag71xx_platform_data {
u8 has_ar8216:1;
u8 is_qca955x:1;
+ unsigned int gmac_num;
+
struct ag71xx_switch_platform_data *switch_data;
void (*ddr_flush)(void);
--
2.8.0.rc3
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
