Could anyone please help me to solve this issue. How we can avoid the wifi reset.
On Thu, Sep 10, 2015 at 9:24 AM, John kerry <kerry9...@gmail.com> wrote: > Hi, > > Yes after reset we are to able to reconnect, I understand using wired > connection we can configure but we need to configure using wireless only. > Is there anyway that we can avoid the Wi-Fi reset? > > Regards, > > On Thu, Sep 10, 2015 at 7:29 AM, David Lang <da...@lang.hm> wrote: > >> On Wed, 9 Sep 2015, John kerry wrote: >> >> Hi, >>> >>> We are working on AR9344 OpenWrt, >>> >>> We have configured the wireless as AP mode and broadcasting the SSID so >>> any >>> device can connect to it and even we are able access the GUI on >>> Smartphone >>> after connecting to that AP. >>> >>> Then we do survey the scanning devices, its gives the Scanning result, >>> then >>> we can join Network to anyone from the list. Then blow page will show as >>> shown below: >>> >>> >>> [image: Inline image 1] >>> >>> >>> The we enter the PassPhrase and Click on Submit button. Then next page >>> will >>> show as below >>> [image: Inline image 2] >>> >>> After Clicking the on *Save & Apply button, *The following files >>> /etc/config/network >>> >>> /etc/config/dhcp, /etc/config/qos etc. >>> >>> Because of this files changes Wi-Fi connection is reset the connection. >>> So >>> we are unable to configure above configuration using Smartphone. >>> >> >> Well, when you reconfigure the interface you are connected to, it is >> going to bounce. Which is why it's suggested that you configure the >> wireless through a wired link. >> >> But once the wifi is reset, you should be able to reconnect, login again >> and continue. Is this not working? If not, what is happening? >> >> David Lang >> > >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
