Hi, Yes after reset we are to able to reconnect, I understand using wired connection we can configure but we need to configure using wireless only. Is there anyway that we can avoid the Wi-Fi reset?
Regards, On Thu, Sep 10, 2015 at 7:29 AM, David Lang <da...@lang.hm> wrote: > On Wed, 9 Sep 2015, John kerry wrote: > > Hi, >> >> We are working on AR9344 OpenWrt, >> >> We have configured the wireless as AP mode and broadcasting the SSID so >> any >> device can connect to it and even we are able access the GUI on Smartphone >> after connecting to that AP. >> >> Then we do survey the scanning devices, its gives the Scanning result, >> then >> we can join Network to anyone from the list. Then blow page will show as >> shown below: >> >> >> [image: Inline image 1] >> >> >> The we enter the PassPhrase and Click on Submit button. Then next page >> will >> show as below >> [image: Inline image 2] >> >> After Clicking the on *Save & Apply button, *The following files >> /etc/config/network >> >> /etc/config/dhcp, /etc/config/qos etc. >> >> Because of this files changes Wi-Fi connection is reset the connection. So >> we are unable to configure above configuration using Smartphone. >> > > Well, when you reconfigure the interface you are connected to, it is going > to bounce. Which is why it's suggested that you configure the wireless > through a wired link. > > But once the wifi is reset, you should be able to reconnect, login again > and continue. Is this not working? If not, what is happening? > > David Lang >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
