On Fri, Aug 21, 2015 at 1:17 PM, Jonas Gorski <j...@openwrt.org> wrote: > This patchset adds sysupgrade support and and builds images for AP148. > > This has been tested on AP148. > > sysupgrade from original QSDK should work in theory, but in practice > either ubiformat or something else in QSDK writes the ubi image in a way > that makes OpenWrt fail to mount the image. U-Boot is able to read from > it. > > Therefore the last two patches that create an "sysupgradeable" image are > marked as RFC. > > Jonas Gorski (10): > ipq806x: enable ubiblock support > image: add a build step for building and appending an ubinized rootfs > build: add a build step for generic sysupgrade nand image > ipq806x: enable smem-parser for nand on AP148 > ipq806x: rename "rootfs" to "ubi" on nand > ipq806x: wrap legacy image in uImage > ipq806x: clear IMAGES for devices > ipq806x: build images and add sysupgrade support for AP148 > image: add a build recipe to wrap an ubi image in a itb file > ipq806x: wrap ubi in itb
Thanks, applied 1-8. I dropped 9 and 10 because while nice in theory, it doesn't help much (as the config is likely incompatible), and you need a non-itb one to flash from U-Boot anyway. Also as noted it doesn't work. Jonas _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
