Add full ubi and sysupgrade images for AP148 and add sysupgrade support
for ipq806x to allow updating the current installation.
Signed-off-by: Jonas Gorski <j...@openwrt.org>
---
.../linux/ipq806x/base-files/lib/upgrade/platform.sh | 18 ++++++++++++++++++
target/linux/ipq806x/image/Makefile | 20 +++++++++++++++++---
2 files changed, 35 insertions(+), 3 deletions(-)
create mode 100644 target/linux/ipq806x/base-files/lib/upgrade/platform.sh
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000..e834ead
--- /dev/null
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,18 @@
+. /lib/ipq806x.sh
+
+PART_NAME=firmware
+
+platform_check_image() {
+ local board=$(ipq806x_board_name)
+
+ case "$board" in
+ AP148)
+ nand_do_platform_check $board $1
+ return $?;
+ ;;
+ *)
+ return 1;
+ esac
+}
+
+# use default for platform_do_upgrade()
diff --git a/target/linux/ipq806x/image/Makefile
b/target/linux/ipq806x/image/Makefile
index dad6ee3..ac0fc84 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -35,36 +35,50 @@ define Device/Default
DEVICE_DTS :=
KERNEL_PREFIX := $$(IMAGE_PREFIX)
IMAGES :=
+ KERNEL_IN_UBI :=
endef
-DEVICE_VARS += DEVICE_DTS
+DEVICE_VARS += DEVICE_DTS KERNEL_IN_UBI
define Device/LegacyImage
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
- KERNEL_INSTALL := 1
endef
define Device/FitImage
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
- KERNEL_INSTALL := 1
+endef
+
+define Device/UbiFit
+ KERNEL_IN_UBI := 1
+ IMAGES := nand-factory.ubi nand-sysupgrade.tar
+ IMAGE/nand-factory.ubi := append-ubi
+ IMAGE/nand-sysupgrade.tar := sysupgrade-nand
endef
define Device/AP148
$(call Device/FitImage)
+ $(call Device/UbiFit)
DEVICE_DTS := qcom-ipq8064-ap148
+ BLOCKSIZE := 128KiB
+ PAGESIZE := 2048
endef
define Device/AP148-legacy
$(call Device/LegacyImage)
+ $(call Device/UbiFit)
DEVICE_DTS := qcom-ipq8064-ap148
+ BLOCKSIZE := 128KiB
+ PAGESIZE := 2048
+ BOARD_NAME := AP148
endef
define Device/DB149
$(call Device/FitImage)
DEVICE_DTS := qcom-ipq8064-db149
+ KERNEL_INSTALL := 1
endef
TARGET_DEVICES += AP148 AP148-legacy DB149
--
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
