On Wed, Aug 26, 2015 at 7:18 PM, Martin Tesar <tesar...@gmail.com> wrote:
> Add support for Comtrend VR-3026e v1.
> The device is almost identical to the Comtrend VR-3025un.
>
> Signed-off-by: Martin Tesar <tesar...@gmail.com>
> ---
> target/linux/brcm63xx/base-files/etc/diag.sh | 3 +
> .../base-files/etc/uci-defaults/02_network | 3 +-
> .../base-files/etc/uci-defaults/09_fix_crc | 1 +
> target/linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 +
> .../lib/preinit/05_init_interfaces_brcm63xx | 1 +
> target/linux/brcm63xx/dts/vr-3026e.dts | 88
> ++++++++++++++++++++++
> target/linux/brcm63xx/image/Makefile | 2 +
> .../brcm63xx/patches-3.18/572-board_VR-3026e.patch | 79 +++++++++++++++++++
> .../brcm63xx/patches-4.1/572-board_VR-3026e.patch | 79 +++++++++++++++++++
> target/linux/brcm63xx/profiles/comtrend.mk | 9 +++
> 10 files changed, 267 insertions(+), 1 deletion(-)
> create mode 100644 target/linux/brcm63xx/dts/vr-3026e.dts
> create mode 100644
> target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
> create mode 100644 target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch
>
> diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh
> b/target/linux/brcm63xx/base-files/etc/diag.sh
> index 7916ac2..7826fad 100644
> --- a/target/linux/brcm63xx/base-files/etc/diag.sh
> +++ b/target/linux/brcm63xx/base-files/etc/diag.sh
> @@ -39,6 +39,9 @@ set_state() {
> vr-3025u)
> status_led="VR-3025u:green:power"
> ;;
> + vr-3026e)
> + status_led="VR-3026e:green:power"
> + ;;
> wap-5813n)
> status_led="WAP-5813n:green:power"
> ;;
> diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
> b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
> index 2ff9e45..4de861c 100644
> --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
> +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
> @@ -94,8 +94,9 @@ fast2504n |\
> fast2704v2 |\
> hg655b |\
> p870hw-51a_v2 |\
> +vr-3025u |\
> vr-3025un |\
> -vr-3025u)
> +vr-3026e)
Why did you change the order of vr-3025u and vr-3025un here? You
didn't do this in your previous versions. Please do not add random
cleanups/changes to your patches.
Jonas
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
