Thank you for noting this, Roman. c
On Fri, Jul 10, 2015 at 10:55 PM, Roman Yeryomin <leroi.li...@gmail.com> wrote: > On 10 July 2015 at 05:07, camden lindsay > <camden.lindsay+open...@gmail.com> wrote: >> I'm sorry, i said ath9k in the subject but the above seems more likely >> to be ath10k. >> >> On Thu, Jul 9, 2015 at 7:03 PM, camden lindsay >> <camden.lindsay+open...@gmail.com> wrote: >>> Hello- >>> >>> Thought I should report this, since there was so much discussion and >>> confusion on tracker https://dev.openwrt.org/ticket/11862 causing a >>> lot of work for some folks here. >>> >>> ...snip... >>> ... >>> [2060235.460000] ath: phy1: Failed to stop TX DMA, queues=0x002! >>> [2060265.460000] ath: phy1: Failed to stop TX DMA, queues=0x002! >>> [2061047.180000] ath: phy1: Failed to stop TX DMA, queues=0x002! >>> [2104015.840000] ath: phy1: Unable to reset channel, reset status -5 >>> [2145012.920000] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, >>> skipped old beacon >>> [2145013.030000] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, >>> skipped old beacon > > It was fixed in trunk (by using newer firmware and driver). > > Regards, > Roman _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
