The Antminer S1 and S3 use a controller with a modified version of
OpenWRT which has a single ethernet port and a wifi antenna header.
This is the patch from their GPL source release which appears to break
support for the tl-wr741nd-v4 in order to support their board. What
would be the proper way to differentiate this device and add support
for it?
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
(revision 38031)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
(working copy)
@@ -27,12 +27,13 @@
#define TL_WR741NDV4_GPIO_LED_WLAN 0
#define TL_WR741NDV4_GPIO_LED_QSS 1
-#define TL_WR741NDV4_GPIO_LED_WAN 13
-#define TL_WR741NDV4_GPIO_LED_LAN1 14
-#define TL_WR741NDV4_GPIO_LED_LAN2 15
-#define TL_WR741NDV4_GPIO_LED_LAN3 16
-#define TL_WR741NDV4_GPIO_LED_LAN4 17
-#define TL_WR741NDV4_GPIO_LED_SYSTEM 27
+#define TL_WR741NDV4_GPIO_LED_WAN 17
+#define TL_WR741NDV4_GPIO_LED_WANL 22
+#define TL_WR741NDV4_GPIO_LED_LAN1 13
+#define TL_WR741NDV4_GPIO_LED_LAN2 14
+#define TL_WR741NDV4_GPIO_LED_LAN3 15
+#define TL_WR741NDV4_GPIO_LED_LAN4 16
+#define TL_WR741NDV4_GPIO_LED_SYSTEM 23
#define TL_MR3220V2_GPIO_BTN_WPS 11
#define TL_MR3220V2_GPIO_BTN_WIFI 24
@@ -68,7 +69,7 @@
}, {
.name = "tp-link:green:lan4",
.gpio = TL_WR741NDV4_GPIO_LED_LAN4,
- .active_low = 1,
+ .active_low = 0,
}, {
.name = "tp-link:green:qss",
.gpio = TL_WR741NDV4_GPIO_LED_QSS,
@@ -76,12 +77,16 @@
}, {
.name = "tp-link:green:system",
.gpio = TL_WR741NDV4_GPIO_LED_SYSTEM,
- .active_low = 1,
+ .active_low = 0,
}, {
.name = "tp-link:green:wan",
.gpio = TL_WR741NDV4_GPIO_LED_WAN,
.active_low = 0,
}, {
+ .name = "tp-link:green:wan_link",
+ .gpio = TL_WR741NDV4_GPIO_LED_WANL,
+ .active_low = 0,
+ }, {
.name = "tp-link:green:wlan",
.gpio = TL_WR741NDV4_GPIO_LED_WLAN,
.active_low = 0,
@@ -100,7 +105,7 @@
.code = KEY_RESTART,
.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR741NDV4_GPIO_BTN_RESET,
- .active_low = 0,
+ .active_low = 1,
}, {
.desc = "WPS",
.type = EV_KEY,
@@ -134,7 +139,20 @@
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- ath79_setup_ar933x_phy4_switch(true, true);
+ if((mac[0] == 0xff) &&
+ (mac[1] == 0xff) &&
+ (mac[2] == 0xff) &&
+ (mac[3] == 0xff) &&
+ (mac[4] == 0xff) &&
+ (mac[5] == 0xff))
+ {
+ printk("MAC FF:FF:FF:FF:FF:FF\n");
+ memcpy(mac, ee+2, 6);
+ mac = ee+2;
+ printk("MAC %02x:%02x:%02x:%02x:%02x:%02x", mac[0], mac[1], mac[2],
mac[3], mac[4], mac[5]);
+ }
+ //ath79_setup_ar933x_phy4_switch(true, true);
+ ath79_setup_ar933x_phy4_switch(false, false);
ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
@@ -156,6 +174,11 @@
static void __init tl_wr741ndv4_setup(void)
{
tl_ap121_setup();
+
+ gpio_request_one(TL_MR3220V2_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio) - 1,
tl_wr741ndv4_leds_gpio);
Index: target/linux/ar71xx/files/drivers/mtd/tplinkpart.c
===================================================================
--- target/linux/ar71xx/files/drivers/mtd/tplinkpart.c (revision 38031)
+++ target/linux/ar71xx/files/drivers/mtd/tplinkpart.c (working copy)
@@ -149,7 +149,7 @@
parts[0].name = "u-boot";
parts[0].offset = 0;
parts[0].size = offset;
- parts[0].mask_flags = MTD_WRITEABLE;
+ //parts[0].mask_flags = MTD_WRITEABLE;
parts[1].name = "kernel";
parts[1].offset = offset;
@@ -159,15 +159,24 @@
parts[2].offset = rootfs_offset;
parts[2].size = art_offset - rootfs_offset;
+ parts[4].name = "art";
+ parts[4].offset = art_offset;
+ parts[4].size = TPLINK_ART_LEN;
+ //part4[3].mask_flags = MTD_WRITEABLE;
+
+ parts[3].name = "firmware";
+ parts[3].offset = offset;
+ parts[3].size = art_offset - offset;
+ #if 0
parts[3].name = "art";
parts[3].offset = art_offset;
parts[3].size = TPLINK_ART_LEN;
- parts[3].mask_flags = MTD_WRITEABLE;
+ //parts[3].mask_flags = MTD_WRITEABLE;
parts[4].name = "firmware";
parts[4].offset = offset;
parts[4].size = art_offset - offset;
-
+ #endif
vfree(header);
*pparts = parts;
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile (revision 38031)
+++ target/linux/ar71xx/image/Makefile (working copy)
@@ -921,7 +921,8 @@
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR720NV3,tl-wr720n-v3,TL-WR720N-v3,ttyATH0,115200,0x07200103,1,4Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR740NV4,tl-wr740n-v4,TL-WR741ND-v4,ttyATH0,115200,0x07400004,1,4Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR741NV4,tl-wr741nd-v4,TL-WR741ND-v4,ttyATH0,115200,0x07410004,1,4Mlzma))
-$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR743NV2,tl-wr743nd-v2,TL-WR741ND-v4,ttyATH0,115200,0x07430002,1,4Mlzma))
+#$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR743NV2,tl-wr743nd-v2,TL-WR741ND-v4,ttyATH0,115200,0x07430002,1,4Mlzma))
+$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR743NV2,tl-wr743nd-v2,TL-WR741ND-v4,ttyATH0,115200,0x07430002,1,8Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR841NV8,tl-wr841n-v8,TL-WR841N-v8,ttyS0,115200,0x08410008,1,4Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR941NV6,tl-wr941nd-v6,TL-WDR3500,ttyS0,115200,0x09410006,1,4Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLWR1041,tl-wr1041n-v2,TL-WR1041N-v2,ttyS0,115200,0x10410002,1,4Mlzma))
Index: target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/01_leds (revision 38031)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/01_leds (working copy)
@@ -181,7 +181,8 @@
;;
tl-wr741nd-v4)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" "link tx rx"
+ ucidef_set_led_netdev "wanl" "WANL" "tp-link:green:wan_link" "eth1" "link"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
Index: package/network/services/dropbear/files/dropbear.config
===================================================================
--- package/network/services/dropbear/files/dropbear.config (revision 38031)
+++ package/network/services/dropbear/files/dropbear.config (working copy)
@@ -2,4 +2,5 @@
option PasswordAuth 'on'
option RootPasswordAuth 'on'
option Port '22'
+# option Interface 'lan'
# option BannerFile '/etc/banner'
Index: package/base-files/files/lib/functions/uci-defaults.sh
===================================================================
--- package/base-files/files/lib/functions/uci-defaults.sh (revision 38031)
+++ package/base-files/files/lib/functions/uci-defaults.sh (working copy)
@@ -8,7 +8,11 @@
local name=$2
local sysfs=$3
local dev=$4
+ local mode="link tx rx"
+ if [ -n "$5" ]; then
+ mode=$5
+ fi
uci -q get system.$cfg && return 0
uci batch <<EOF
@@ -17,7 +21,7 @@
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='netdev'
set system.$cfg.dev='$dev'
-set system.$cfg.mode='link tx rx'
+set system.$cfg.mode='$mode'
EOF
UCIDEF_LEDS_CHANGED=1
}
Index: package/base-files/files/etc/rc.button/reset
===================================================================
--- package/base-files/files/etc/rc.button/reset (revision 38031)
+++ package/base-files/files/etc/rc.button/reset (working copy)
@@ -14,5 +14,5 @@
elif [ "$SEEN" -gt 5 ]
then
echo "FACTORY RESET" > /dev/console
- jffs2reset -y && reboot &
+ jffs2reset -y && reboot -f &
fi
Index: package/base-files/files/etc/shadow
===================================================================
--- package/base-files/files/etc/shadow (revision 38031)
+++ package/base-files/files/etc/shadow (working copy)
@@ -1,4 +1,5 @@
-root:x:0:0:99999:7:::
+root:$1$2zyJL0u3$UjHfNFlkkj9azThzkLaVA0:16013:0:99999:7:::
+admin:*:16013:0:99999:7:::
daemon:*:0:0:99999:7:::
ftp:*:0:0:99999:7:::
network:*:0:0:99999:7:::
Index: package/base-files/files/etc/profile
===================================================================
--- package/base-files/files/etc/profile (revision 38031)
+++ package/base-files/files/etc/profile (working copy)
@@ -8,6 +8,7 @@
[ -x /bin/more ] || alias more=less
[ -x /usr/bin/vim ] && alias vi=vim || alias vim=vi
+[ -x /bin/ls ] && alias ll=ls -l
[ -z "$KSH_VERSION" -o \! -s /etc/mkshrc ] || . /etc/mkshrc
Index: package/base-files/files/etc/config/system
===================================================================
--- package/base-files/files/etc/config/system (revision 38031)
+++ package/base-files/files/etc/config/system (working copy)
@@ -1,6 +1,8 @@
config system
- option hostname OpenWrt
- option timezone UTC
+ option hostname antMiner
+ #option timezone UTC
+ option zonename 'Asia/Shanghai'
+ option timezone 'CST-8'
config timeserver ntp
list server 0.openwrt.pool.ntp.org
Index: tools/firmware-utils/src/mktplinkfw.c
===================================================================
--- tools/firmware-utils/src/mktplinkfw.c (revision 38031)
+++ tools/firmware-utils/src/mktplinkfw.c (working copy)
@@ -269,10 +269,16 @@
.hw_rev = 1,
.layout_id = "4M",
}, {
+ /*}, {
.id = "TL-WR741NDv4",
.hw_id = HWID_TL_WR741ND_V4,
.hw_rev = 1,
.layout_id = "4Mlzma",
+ }, {*/
+ .id = "TL-WR741NDv4",
+ .hw_id = HWID_TL_WR741ND_V4,
+ .hw_rev = 1,
+ .layout_id = "4Mlzma",
}, {
.id = "TL-WR740Nv1",
.hw_id = HWID_TL_WR740N_V1,
@@ -283,16 +289,22 @@
.hw_id = HWID_TL_WR740N_V3,
.hw_rev = 1,
.layout_id = "4M",
- }, {
+ /*},{
.id = "TL-WR743NDv1",
.hw_id = HWID_TL_WR743ND_V1,
.hw_rev = 1,
.layout_id = "4M",
+ }, {*/
}, {
+ .id = "TL-WR743NDv1",
+ .hw_id = HWID_TL_WR743ND_V2,
+ .hw_rev = 1,
+ .layout_id = "8M",
+ }, {
.id = "TL-WR743NDv2",
.hw_id = HWID_TL_WR743ND_V2,
.hw_rev = 1,
- .layout_id = "4Mlzma",
+ .layout_id = "8Mlzma",
}, {
.id = "TL-WR841Nv1.5",
.hw_id = HWID_TL_WR841N_V1_5,
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
