Hi, comments inline
On 06/04/2015 02:15, 郭传鈜 wrote: > First of all,this patch is not created by me.I just help him to send this > patch:-D > > MicroWRT is an wireless router with 2 USB,1 ethernet port. It > has a 16M flash and 64M DDR2 RAM. You can use most interface, such as > i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to > combine with the core board. The detailed information, please refer to > https://www.microduino.cc/wiki/index.php?title=Main_Page > > This patch adds support for it. > Because there is only one port,so disabled VLAN and use eth0 as lan > port. and only a power LED control by power pin. > Signed-off-by: 盛凯 <shengkai81 at gmail.com> > --- > .../linux/ramips/base-files/etc/board.d/02_network | 1 + > target/linux/ramips/base-files/lib/ramips.sh | 3 + > .../ramips/base-files/lib/upgrade/platform.sh | 1 + > target/linux/ramips/dts/MicroWRT.dts | 107 > +++++++++++++++++++++ > target/linux/ramips/image/Makefile | 2 + > target/linux/ramips/mt7620/profiles/microwrt.mk | 12 +++ > 6 files changed, 126 insertions(+) > create mode 100644 target/linux/ramips/dts/MicroWRT.dts > create mode 100644 target/linux/ramips/mt7620/profiles/microwrt.mk > > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network > b/target/linux/ramips/base-files/etc/board.d/02_network > index d4ec19d..2035ab0 100755 > --- a/target/linux/ramips/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/base-files/etc/board.d/02_network > @@ -45,6 +45,7 @@ ramips_setup_interfaces() > > 3g150b | \ > 3g300m | \ > + microwrt | \ there is a space here > w150m | \ > zte-q7 | \ > all0256n | \ > diff --git a/target/linux/ramips/base-files/lib/ramips.sh > b/target/linux/ramips/base-files/lib/ramips.sh > index fc6eb37..d115b4f 100755 > --- a/target/linux/ramips/base-files/lib/ramips.sh > +++ b/target/linux/ramips/base-files/lib/ramips.sh > @@ -202,6 +202,9 @@ ramips_board_detect() { > *"Planex MZK-750DHP") > name="mzk-750dhp" > ;; > + *"MakerModule MicroWRT") > + name="microwrt" > + ;; spaces here aswell, use tabs please > *"NBG-419N") > name="nbg-419n" > ;; > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh > b/target/linux/ramips/base-files/lib/upgrade/platform.sh > index a5773b5..57a339e 100755 > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh > @@ -60,6 +60,7 @@ platform_check_image() { > m2m | \ > m3 | \ > m4 | \ > + microwrt | \ spaces here aswell, use tabs please the rest looks good. John > mlw221 | \ > mlwg2 | \ > mofi3500-3gn | \ > diff --git a/target/linux/ramips/dts/MicroWRT.dts > b/target/linux/ramips/dts/MicroWRT.dts > new file mode 100644 > index 0000000..8088ccb > --- /dev/null > +++ b/target/linux/ramips/dts/MicroWRT.dts > @@ -0,0 +1,107 @@ > +/dts-v1/; > + > +/include/ "mt7620a.dtsi" > + > +/ { > + compatible = "microwrt", "ralink,mt7620a-soc"; > + model = "MakerModule MicroWRT"; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + }; > + > + palmbus@10000000 { > + gpio2: gpio@660 { > + status = "okay"; > + }; > + > + gpio3: gpio@688 { > + status = "okay"; > + }; > + > + spi@b00 { > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "w25q128"; > + reg = <0 0>; > + linux,modalias = "m25p80", "w25q128"; > + spi-max-frequency = <10000000>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0 0x30000>; > + read-only; > + }; > + > + partition@30000 { > + label = "u-boot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@40000 { > + label = "factory"; > + reg = <0x40000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0xfb0000>; > + }; > + }; > + }; > + }; > + > + ehci@101c0000 { > + status = "okay"; > + }; > + > + ohci@101c1000 { > + status = "okay"; > + }; > + > + pcie@10140000 { > + status = "okay"; > + }; > + > + ethernet@10100000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&ephy_pins>; > + mtd-mac-address = <&factory 0x4>; > + ralink,port-map = "llllw"; > + }; > + > + wmac@10180000 { > + ralink,mtd-eeprom = <&factory 0>; > + }; > + > + pinctrl { > + state_default: pinctrl0 { > + default { > + ralink,group = "wled", "i2c", "wdt", "uartf"; > + ralink,function = "gpio"; > + }; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <20>; > + reset { > + label = "reset"; > + gpios = <&gpio0 1 1>; > + linux,code = <0x198>; > + }; > + wps { > + label = "wps"; > + gpios = <&gpio0 2 1>; > + linux,code = <0x211>; > + }; > + }; > + }; > diff --git a/target/linux/ramips/image/Makefile > b/target/linux/ramips/image/Makefile > index 743f7b4..30d9743 100644 > --- a/target/linux/ramips/image/Makefile > +++ b/target/linux/ramips/image/Makefile > @@ -865,6 +865,7 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call > BuildFirmware/Default16M/$(1),$(1) > Image/Build/Profile/ZTE-Q7=$(call > BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) > Image/Build/Profile/ZBT-WA05=$(call > BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) > Image/Build/Profile/ArcherC20i=$(call > BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) > +Image/Build/Profile/MicroWRT=$(call > BuildFirmware/Default16M/$(1),$(1),microwrt,MicroWRT) > > > ifeq ($(SUBTARGET),mt7620) > @@ -895,6 +896,7 @@ define Image/Build/Profile/Default > $(call Image/Build/Profile/ZTE-Q7,$(1)) > $(call Image/Build/Profile/ZBT-WA05,$(1)) > $(call Image/Build/Profile/ArcherC20i,$(1)) > + $(call Image/Build/Profile/MicroWRT,$(1)) > endef > endif > > diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk > b/target/linux/ramips/mt7620/profiles/microwrt.mk > new file mode 100644 > index 0000000..e1e944b > --- /dev/null > +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk > @@ -0,0 +1,11 @@ > + define Profile/MicroWRT > + NAME:=MakerModule MicroWRT > + PACKAGES:=\ > + kmod-usb-core kmod-usb2 kmod-usb-ohci > + endef > + > + define Profile/MicroWRT/Description > + Support for MicroWRT > + endef > + $(eval $(call Profile,MicroWRT)) > + > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
