The title of the old patch is not started with [PATCH] so it is not recognized as a patch in the patchwork:-)
2015-04-06 9:09 GMT+08:00 L. D. Pinney <ldpin...@gmail.com>: > Also... > > You should have accounts on : > https://patchwork.ozlabs.org/ > > Then Jason can mark the old patch superseded. > > Larry > > > On Sun, Apr 5, 2015 at 7:30 PM, L. D. Pinney <ldpin...@gmail.com> wrote: > >> >> Hi : >> >> This one looks much better :) >> >> Larry >> >> On Sun, Apr 5, 2015 at 7:15 PM, 郭传鈜 <gch981...@gmail.com> wrote: >> >>> First of all,this patch is not created by me.I just help him to send >>> this patch:-D >>> >>> MicroWRT is an wireless router with 2 USB,1 ethernet port. It >>> has a 16M flash and 64M DDR2 RAM. You can use most interface, such as >>> i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to >>> combine with the core board. The detailed information, please refer to >>> https://www.microduino.cc/wiki/index.php?title=Main_Page >>> >>> This patch adds support for it. >>> Because there is only one port,so disabled VLAN and use eth0 as lan >>> port. and only a power LED control by power pin. >>> Signed-off-by: 盛凯 <shengkai81 at gmail.com> >>> --- >>> .../linux/ramips/base-files/etc/board.d/02_network | 1 + >>> target/linux/ramips/base-files/lib/ramips.sh | 3 + >>> .../ramips/base-files/lib/upgrade/platform.sh | 1 + >>> target/linux/ramips/dts/MicroWRT.dts | 107 >>> +++++++++++++++++++++ >>> target/linux/ramips/image/Makefile | 2 + >>> target/linux/ramips/mt7620/profiles/microwrt.mk | 12 +++ >>> 6 files changed, 126 insertions(+) >>> create mode 100644 target/linux/ramips/dts/MicroWRT.dts >>> create mode 100644 target/linux/ramips/mt7620/profiles/microwrt.mk >>> >>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network >>> b/target/linux/ramips/base-files/etc/board.d/02_network >>> index d4ec19d..2035ab0 100755 >>> --- a/target/linux/ramips/base-files/etc/board.d/02_network >>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network >>> @@ -45,6 +45,7 @@ ramips_setup_interfaces() >>> >>> 3g150b | \ >>> 3g300m | \ >>> + microwrt | \ >>> w150m | \ >>> zte-q7 | \ >>> all0256n | \ >>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh >>> b/target/linux/ramips/base-files/lib/ramips.sh >>> index fc6eb37..d115b4f 100755 >>> --- a/target/linux/ramips/base-files/lib/ramips.sh >>> +++ b/target/linux/ramips/base-files/lib/ramips.sh >>> @@ -202,6 +202,9 @@ ramips_board_detect() { >>> *"Planex MZK-750DHP") >>> name="mzk-750dhp" >>> ;; >>> + *"MakerModule MicroWRT") >>> + name="microwrt" >>> + ;; >>> *"NBG-419N") >>> name="nbg-419n" >>> ;; >>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh >>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh >>> index a5773b5..57a339e 100755 >>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh >>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh >>> @@ -60,6 +60,7 @@ platform_check_image() { >>> m2m | \ >>> m3 | \ >>> m4 | \ >>> + microwrt | \ >>> mlw221 | \ >>> mlwg2 | \ >>> mofi3500-3gn | \ >>> diff --git a/target/linux/ramips/dts/MicroWRT.dts >>> b/target/linux/ramips/dts/MicroWRT.dts >>> new file mode 100644 >>> index 0000000..8088ccb >>> --- /dev/null >>> +++ b/target/linux/ramips/dts/MicroWRT.dts >>> @@ -0,0 +1,107 @@ >>> +/dts-v1/; >>> + >>> +/include/ "mt7620a.dtsi" >>> + >>> +/ { >>> + compatible = "microwrt", "ralink,mt7620a-soc"; >>> + model = "MakerModule MicroWRT"; >>> + >>> + chosen { >>> + bootargs = "console=ttyS0,115200"; >>> + }; >>> + >>> + palmbus@10000000 { >>> + gpio2: gpio@660 { >>> + status = "okay"; >>> + }; >>> + >>> + gpio3: gpio@688 { >>> + status = "okay"; >>> + }; >>> + >>> + spi@b00 { >>> + status = "okay"; >>> + >>> + m25p80@0 { >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + compatible = "w25q128"; >>> + reg = <0 0>; >>> + linux,modalias = "m25p80", "w25q128"; >>> + spi-max-frequency = <10000000>; >>> + >>> + partition@0 { >>> + label = "u-boot"; >>> + reg = <0x0 0x30000>; >>> + read-only; >>> + }; >>> + >>> + partition@30000 { >>> + label = "u-boot-env"; >>> + reg = <0x30000 0x10000>; >>> + read-only; >>> + }; >>> + >>> + factory: partition@40000 { >>> + label = "factory"; >>> + reg = <0x40000 0x10000>; >>> + read-only; >>> + }; >>> + >>> + partition@50000 { >>> + label = "firmware"; >>> + reg = <0x50000 0xfb0000>; >>> + }; >>> + }; >>> + }; >>> + }; >>> + >>> + ehci@101c0000 { >>> + status = "okay"; >>> + }; >>> + >>> + ohci@101c1000 { >>> + status = "okay"; >>> + }; >>> + >>> + pcie@10140000 { >>> + status = "okay"; >>> + }; >>> + >>> + ethernet@10100000 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&ephy_pins>; >>> + mtd-mac-address = <&factory 0x4>; >>> + ralink,port-map = "llllw"; >>> + }; >>> + >>> + wmac@10180000 { >>> + ralink,mtd-eeprom = <&factory 0>; >>> + }; >>> + >>> + pinctrl { >>> + state_default: pinctrl0 { >>> + default { >>> + ralink,group = "wled", "i2c", "wdt", >>> "uartf"; >>> + ralink,function = "gpio"; >>> + }; >>> + }; >>> + }; >>> + >>> + gpio-keys-polled { >>> + compatible = "gpio-keys-polled"; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + poll-interval = <20>; >>> + reset { >>> + label = "reset"; >>> + gpios = <&gpio0 1 1>; >>> + linux,code = <0x198>; >>> + }; >>> + wps { >>> + label = "wps"; >>> + gpios = <&gpio0 2 1>; >>> + linux,code = <0x211>; >>> + }; >>> + }; >>> + }; >>> diff --git a/target/linux/ramips/image/Makefile >>> b/target/linux/ramips/image/Makefile >>> index 743f7b4..30d9743 100644 >>> --- a/target/linux/ramips/image/Makefile >>> +++ b/target/linux/ramips/image/Makefile >>> @@ -865,6 +865,7 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call >>> BuildFirmware/Default16M/$(1),$(1) >>> Image/Build/Profile/ZTE-Q7=$(call >>> BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) >>> Image/Build/Profile/ZBT-WA05=$(call >>> BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) >>> Image/Build/Profile/ArcherC20i=$(call >>> BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) >>> +Image/Build/Profile/MicroWRT=$(call >>> BuildFirmware/Default16M/$(1),$(1),microwrt,MicroWRT) >>> >>> >>> ifeq ($(SUBTARGET),mt7620) >>> @@ -895,6 +896,7 @@ define Image/Build/Profile/Default >>> $(call Image/Build/Profile/ZTE-Q7,$(1)) >>> $(call Image/Build/Profile/ZBT-WA05,$(1)) >>> $(call Image/Build/Profile/ArcherC20i,$(1)) >>> + $(call Image/Build/Profile/MicroWRT,$(1)) >>> endef >>> endif >>> >>> diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk >>> b/target/linux/ramips/mt7620/profiles/microwrt.mk >>> new file mode 100644 >>> index 0000000..e1e944b >>> --- /dev/null >>> +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk >>> @@ -0,0 +1,11 @@ >>> + define Profile/MicroWRT >>> + NAME:=MakerModule MicroWRT >>> + PACKAGES:=\ >>> + kmod-usb-core kmod-usb2 kmod-usb-ohci >>> + endef >>> + >>> + define Profile/MicroWRT/Description >>> + Support for MicroWRT >>> + endef >>> + $(eval $(call Profile,MicroWRT)) >>> + >>> -- >>> 2.1.0 >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >> >> >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
