Hi, On Fri, May 02, 2014 at 09:31:43PM +0200, Steven Barth wrote: > >I've read everything that's linked from the start page on > >http://www.homewrt.org/ - but it's not really much as far as "how can > >I see what it does? how can I debug it? Is there only one single > >option to turn this on and off ("option proto 'hnet'"), or is there more? > >Does hnetd handle IPv4 and IPv6 today? How do I force selection of a > >certain > >/64 on a specific interface?" question go... :-) > > Yeah to turn it on on a given interface simply change the proto to > "hnet" (and remove any previous interface using the same interface in > /etc/config/network). If you want to not use bridging you need to create > one logical interface in /etc/config/network for each switch-port / vlan.
OK. What about the "wan6" interface? Default OpenWRT config has
config interface 'wan'
option ifname 'eth0'
option proto 'dhcp'
config interface 'wan6'
option ifname '@wan'
option proto 'dhcpv6'
so I assume the "wan6" interface would completely go away, leading to
config interface 'wan'
option ifname 'eth0'
option proto 'hnet'
#config interface 'wan6'
# option ifname '@wan'
# option proto 'dhcpv6'
right?
... but that doesn't work out for me :-( - I can see hnetd talk, but I
completely lost "global IPv6" - no RA learning on the WAN anymore, and
no DHCPv6 PD either.
The upstream server complains about IA-NA not being supported (Cisco),
but I don't see a PD request in there...
May 2 22:47:09: IPv6 DHCP: Received SOLICIT from FE80::CC4F:57BB:3A1:93FD on
Vlan2
May 2 22:47:09: IPv6 DHCP: Option IA-NA(3) is not supported yet
May 2 22:47:09: IPv6 DHCP: Sending ADVERTISE to FE80::CC4F:57BB:3A1:93FD on
Vlan2
May 2 22:47:09: IPv6 DHCP: Received SOLICIT from FE80::12FE:EDFF:FEE6:5F33 on
Vlan62
May 2 22:47:09: IPv6 DHCP: Option USER-CLASS(15) is not processed
May 2 22:47:09: IPv6 DHCP: Option RECONF-ACCEPT(20) is not processed
May 2 22:47:09: IPv6 DHCP: Option UNKNOWN(39) is not processed
May 2 22:47:09: IPv6 DHCP: Option IA-NA(3) is not supported yet
May 2 22:47:09: IPv6 DHCP: Sending ADVERTISE to FE80::12FE:EDFF:FEE6:5F33 on
Vlan62
(Upstream router sends RA with "A" and "O" bit set, and that worked nicely
with "proto dhcpv6")
and "ifstatus wan" also looks very much "passive"...
root@OpenWrt:~# ifstatus wan
{
"up": true,
"pending": false,
"available": true,
"autostart": true,
"uptime": 419,
"l3_device": "eth0",
"proto": "hnet",
"device": "eth0",
"metric": 0,
"delegation": true,
"ipv4-address": [
],
"ipv6-address": [
],
"ipv6-prefix": [
],
"ipv6-prefix-assignment": [
],
"route": [
],
"dns-server": [
"195.30.0.2"
],
"dns-search": [
],
"inactive": {
"ipv4-address": [
],
"ipv6-address": [
],
"route": [
],
"dns-server": [
],
"dns-search": [
]
},
"data": {
"dhcpv4": "disabled",
"dhcpv6": "disabled",
"ra": "disabled",
"ra_management": 1,
"zone": "wan"
}
}
... so, something I am missing... :-/
thanks,
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany g...@greenie.muc.de
fax: +49-89-35655025 g...@net.informatik.tu-muenchen.de
pgp9S8EpMh09K.pgp
Description: PGP signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
