On Tue, Feb 4, 2014 at 4:40 PM, Roman Yeryomin <leroi.li...@gmail.com> wrote: > Thanks for answer, Helmut! > > On 3 February 2014 18:01, Helmut Schaa <helmut.sc...@googlemail.com> wrote: >> On Sat, Feb 1, 2014 at 1:08 AM, Roman Yeryomin <leroi.li...@gmail.com> wrote: >>> Unfortunately I have no experience in wifi drivers and this is my >>> first one. Even worse I don't know what those register (rfcsr and bbp) >>> writes _should_ do because they are not in datasheet (I suppose the >>> earlier chips rf registers are not documented also). >> >> Yep, there are no documents out there as far as I know :/ > > So it's mostly just magic and assumptions... > >>> Attaching the patches hoping somebody with more experience could help >>> or at least give an advise. The patches are not very clean and >>> probably some things can be done in a different way but that's not the >>> point right now. >>> >>> Currently wifi interface appears in the system and can be enabled but >>> `iw dev wlan0 scan' gives no result and wlan0 transmits one packet >>> roughly in 10 minutes as per ifconfig (ssid doesn't appear in the >>> air). >>> `iw phy' output looks like this: >> >> Maybe you should start with a simple monitor interface to get the RX >> path working (iw phy phy0 interface add mon0 type monitor). >> Just run a tcpdump on mon0 and see if you can receive something (with >> your patches applied). > > Unfortunately it doesn't give any results. > Also rx counter was always zero - I forgot to mention that. > What I thought was suspicious is "Available Antennas: TX 0 RX 0" in iw > phy output, but I've checked other chips which do work and they all > have the same record.
Yeah, rt2x00 does not initialize these AFAIK. So, you ported the code from the ralink rt2860 driver, right? I haven't looked into newer ralink chips at all. Did you check if any MAC layer changes regarding RX and TX rings exist? helmut _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
