On Mon, Dec 30, 2013 at 12:44 PM, jonsm...@gmail.com <jonsm...@gmail.com>wrote:
>
> On Mon, Dec 30, 2013 at 12:07 PM, Darija Tadin-Đurović
> <68da...@gmail.com>wrote:
>
>> Yes.
>> My router didn't complain about it and was reachable by ssh.
>
>
> John will need to comment on if this is a correct fix. I don't know enough
> about what netdev->hw_features and netdev->vlan_features do.
>
My web server works again with this fix, but John still needs to tell us if
it is the correct fix.
>
>
>
>>
>>
>>
>> --
>> Time is the quality of nature that keeps events from happening all at
>> once. Lately it doesn’t seem to be working.
>> —Anonymous
>>
>> * jonsm...@gmail.com <jonsm...@gmail.com> [2013-12-30 11:44:29 -0500]:
>>
>>
>> On Mon, Dec 30, 2013 at 11:19 AM, Darija Tadin-Đurović <
>>> 68da...@gmail.com>wrote:
>>>
>>> Hello,
>>>> after a day and a half (!) offline, thanks to my laptop, I finally got
>>>> back to our RT5350 eth driver problem, and I have a solution that works
>>>> for
>>>> me. Jon, can you please test on your AsiaRF?
>>>>
>>>> With this patch, the TCP checksums are again correctly calculated, hence
>>>> the router is again fine. Tested on RT5350 / HLK-RM04.
>>>> Regards
>>>> Darki
>>>>
>>>>
>>> This leaves netdev->hw_features, netdev->vlan_features uninitialized
>>>
>>>
>>>
>>>
>>>> Signed-off-by: Darija Tadin-Đurović <68da...@gmail.com>
>>>>
>>>> --- a/drivers/net/ethernet/ralink/ralink_soc_eth.c
>>>> +++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
>>>> @@ -740,9 +740,9 @@ static int fe_probe(struct platform_devi
>>>> if (soc->tso) {
>>>> dev_info(&pdev->dev, "Enabling TSO\n");
>>>> netdev->features |= NETIF_F_SG | NETIF_F_TSO |
>>>> NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
>>>> + netdev->hw_features = netdev->vlan_features =
>>>> netdev->features;
>>>> }
>>>> - netdev->hw_features = netdev->vlan_features = netdev->features;
>>>> netdev->irq = platform_get_irq(pdev, 0);
>>>> if (netdev->irq < 0) {
>>>>
>>>>
>>>> --
>>>> Time is the quality of nature that keeps events from happening all at
>>>> once. Lately it doesn’t seem to be working.
>>>> —Anonymous
>>>>
>>>> * John Crispin <blo...@openwrt.org> [2013-12-28 09:18:25 +0100]:
>>>>
>>>> On 28/12/13 05:36, jonsm...@gmail.com wrote:
>>>>
>>>>>
>>>>> On Fri, Dec 27, 2013 at 4:16 PM, John Crispin<blo...@openwrt.org>
>>>>>> wrote:
>>>>>>
>>>>>> Hi
>>>>>>>
>>>>>>> i just pushed a patch that i think will fix the issue. can you please
>>>>>>> test
>>>>>>> it as i don't have access to a rt5350 board right now
>>>>>>>
>>>>>>> Didn't fix it. Still same failure.
>>>>>>
>>>>>>
>>>>>> ok, i'll have access to a rt5350 board on the 30th. you'll have to
>>>>> wait
>>>>> until then i am afraid
>>>>>
>>>>> John
>>>>>
>>>>>
>>>>
>>>
>>> --
>>> Jon Smirl
>>> jonsm...@gmail.com
>>>
>>
>
>
> --
> Jon Smirl
> jonsm...@gmail.com
>
--
Jon Smirl
jonsm...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
