On Mon, Dec 30, 2013 at 12:07 PM, Darija Tadin-Đurović <68da...@gmail.com>wrote:
> Yes.
> My router didn't complain about it and was reachable by ssh.
John will need to comment on if this is a correct fix. I don't know enough
about what netdev->hw_features and netdev->vlan_features do.
>
>
>
> --
> Time is the quality of nature that keeps events from happening all at
> once. Lately it doesn’t seem to be working.
> —Anonymous
>
> * jonsm...@gmail.com <jonsm...@gmail.com> [2013-12-30 11:44:29 -0500]:
>
>
> On Mon, Dec 30, 2013 at 11:19 AM, Darija Tadin-Đurović <68da...@gmail.com
>> >wrote:
>>
>> Hello,
>>> after a day and a half (!) offline, thanks to my laptop, I finally got
>>> back to our RT5350 eth driver problem, and I have a solution that works
>>> for
>>> me. Jon, can you please test on your AsiaRF?
>>>
>>> With this patch, the TCP checksums are again correctly calculated, hence
>>> the router is again fine. Tested on RT5350 / HLK-RM04.
>>> Regards
>>> Darki
>>>
>>>
>> This leaves netdev->hw_features, netdev->vlan_features uninitialized
>>
>>
>>
>>
>>> Signed-off-by: Darija Tadin-Đurović <68da...@gmail.com>
>>>
>>> --- a/drivers/net/ethernet/ralink/ralink_soc_eth.c
>>> +++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
>>> @@ -740,9 +740,9 @@ static int fe_probe(struct platform_devi
>>> if (soc->tso) {
>>> dev_info(&pdev->dev, "Enabling TSO\n");
>>> netdev->features |= NETIF_F_SG | NETIF_F_TSO |
>>> NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
>>> + netdev->hw_features = netdev->vlan_features =
>>> netdev->features;
>>> }
>>> - netdev->hw_features = netdev->vlan_features = netdev->features;
>>> netdev->irq = platform_get_irq(pdev, 0);
>>> if (netdev->irq < 0) {
>>>
>>>
>>> --
>>> Time is the quality of nature that keeps events from happening all at
>>> once. Lately it doesn’t seem to be working.
>>> —Anonymous
>>>
>>> * John Crispin <blo...@openwrt.org> [2013-12-28 09:18:25 +0100]:
>>>
>>> On 28/12/13 05:36, jonsm...@gmail.com wrote:
>>>
>>>>
>>>> On Fri, Dec 27, 2013 at 4:16 PM, John Crispin<blo...@openwrt.org>
>>>>> wrote:
>>>>>
>>>>> Hi
>>>>>>
>>>>>> i just pushed a patch that i think will fix the issue. can you please
>>>>>> test
>>>>>> it as i don't have access to a rt5350 board right now
>>>>>>
>>>>>> Didn't fix it. Still same failure.
>>>>>
>>>>>
>>>>> ok, i'll have access to a rt5350 board on the 30th. you'll have to
>>>> wait
>>>> until then i am afraid
>>>>
>>>> John
>>>>
>>>>
>>>
>>
>> --
>> Jon Smirl
>> jonsm...@gmail.com
>>
>
--
Jon Smirl
jonsm...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
