Well if you need this that badly, you can patch it yourself :)
git clone git://git.openwrt.org/openwrt.git
2013/11/8 Weedy <weedy2...@gmail.com>:
> Can this pretty please not die to bitrot?
> I need this merged so badly ;_;
>
>
> On Thu, Oct 31, 2013 at 7:33 PM, Marcin Jurkowski <marci...@gmail.com>
> wrote:
>>
>> This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
>> router.
>> It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
>> modem equipped with 64 MiB RAM and 8 MiB flash.
>> ---
>> .../brcm63xx/patches-3.10/536-board_fast2704.patch | 133
>> +++++++++++++++++++++
>> 1 file changed, 133 insertions(+)
>> create mode 100644
>> target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
>>
>> diff --git a/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
>> b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
>> new file mode 100644
>> index 0000000..db34932
>> --- /dev/null
>> +++ b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
>> @@ -0,0 +1,133 @@
>> +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
>> ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
>> +@@ -1477,6 +1477,122 @@ static struct board_info __initdata boar
>> + },
>> + };
>> +
>> ++static struct board_info __initdata board_FAST2704V2 = {
>> ++ .name = "F@ST2704V2",
>> ++ .expected_cpu_id = 0x6328,
>> ++
>> ++ .has_uart0 = 1,
>> ++ .has_pci = 1,
>> ++ .has_ohci0 = 1,
>> ++ .has_ehci0 = 1,
>> ++ .has_usbd = 1,
>> ++
>> ++ .has_enetsw = 1,
>> ++
>> ++ .enetsw = {
>> ++ .used_ports = {
>> ++ [0] = {
>> ++ .used = 1,
>> ++ .phy_id = 1,
>> ++ .name = "Port 1",
>> ++ },
>> ++ [1] = {
>> ++ .used = 1,
>> ++ .phy_id = 2,
>> ++ .name = "Port 2",
>> ++ },
>> ++ [2] = {
>> ++ .used = 1,
>> ++ .phy_id = 3,
>> ++ .name = "Port 3",
>> ++ },
>> ++ [3] = {
>> ++ .used = 1,
>> ++ .phy_id = 4,
>> ++ .name = "Port 4",
>> ++ },
>> ++ },
>> ++ },
>> ++
>> ++ .leds = {
>> ++ /* front LEDs */
>> ++ {
>> ++ .name =
>> "F@ST2704V2:green:power",
>> ++ .gpio = 4,
>> ++ .active_low = 1,
>> ++ .default_trigger = "default-on",
>> ++ },
>> ++ {
>> ++ .name = "F@ST2704V2:red:power",
>> ++ .gpio = 5,
>> ++ .active_low = 1,
>> ++ },
>> ++ {
>> ++ .name = "F@ST2704V2:red:inet",
>> ++ .gpio = 2,
>> ++ .active_low = 1,
>> ++ },
>> ++ {
>> ++ .name = "F@ST2704V2:green:dsl",
>> ++ .gpio = 3,
>> ++ .active_low = 1,
>> ++ },
>> ++ {
>> ++ .name = "F@ST2704V2:green:inet",
>> ++ .gpio = 11,
>> ++ .active_low = 1,
>> ++ },
>> ++ {
>> ++ .name = "F@ST2704V2:green:usb",
>> ++ .gpio = 1,
>> ++ .active_low = 1,
>> ++ },
>> ++
>> ++ /* side button LEDs */
>> ++ {
>> ++ .name = "F@ST2704V2:green:wps",
>> ++ .gpio = 10,
>> ++ .active_low = 1,
>> ++ },
>> ++
>> ++ /* FIXME: can't control gpio0 line in "out" state, needs
>> further investigation */
>> ++ /*
>> ++ {
>> ++ .name =
>> "F@ST2704V2:green:rfkill",
>> ++ .gpio = 0,
>> ++ .active_low = 1,
>> ++ },
>> ++ */
>> ++
>> ++ },
>> ++ .buttons = {
>> ++ {
>> ++ .desc = "reset",
>> ++ .gpio = 23,
>> ++ .active_low = 1,
>> ++ .type = EV_KEY,
>> ++ .code = KEY_RESTART,
>> ++ .debounce_interval =
>> BCM963XX_KEYS_DEBOUNCE_INTERVAL,
>> ++ },
>> ++ {
>> ++ .desc = "wps",
>> ++ .gpio = 24,
>> ++ .active_low = 1,
>> ++ .type = EV_KEY,
>> ++ .code = KEY_WPS_BUTTON,
>> ++ .debounce_interval =
>> BCM963XX_KEYS_DEBOUNCE_INTERVAL,
>> ++ },
>> ++ {
>> ++ .desc = "rfkill",
>> ++ .gpio = 15,
>> ++ .active_low = 1,
>> ++ .type = EV_KEY,
>> ++ .code = KEY_WLAN,
>> ++ .debounce_interval =
>> BCM963XX_KEYS_DEBOUNCE_INTERVAL,
>> ++ },
>> ++ },
>> ++};
>> ++
>> + static struct board_info __initdata board_rta1025w_16 = {
>> + .name = "RTA1025W_16",
>> + .expected_cpu_id = 0x6348,
>> +@@ -3810,6 +3926,7 @@ static const struct board_info __initcon
>> + &board_963281TAN,
>> + &board_963281T_TEF,
>> + &board_dsl_274xb_f1,
>> ++ &board_FAST2704V2,
>> + #endif
>> + #ifdef CONFIG_BCM63XX_CPU_6338
>> + &board_96338gw,
>> --
>> 1.8.1.5
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
