Can this pretty please not die to bitrot?
I need this merged so badly ;_;
On Thu, Oct 31, 2013 at 7:33 PM, Marcin Jurkowski <marci...@gmail.com>wrote:
> This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
> router.
> It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
> modem equipped with 64 MiB RAM and 8 MiB flash.
> ---
> .../brcm63xx/patches-3.10/536-board_fast2704.patch | 133
> +++++++++++++++++++++
> 1 file changed, 133 insertions(+)
> create mode 100644
> target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
>
> diff --git a/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
> b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
> new file mode 100644
> index 0000000..db34932
> --- /dev/null
> +++ b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
> @@ -0,0 +1,133 @@
> +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
> ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> +@@ -1477,6 +1477,122 @@ static struct board_info __initdata boar
> + },
> + };
> +
> ++static struct board_info __initdata board_FAST2704V2 = {
> ++ .name = "F@ST2704V2",
> ++ .expected_cpu_id = 0x6328,
> ++
> ++ .has_uart0 = 1,
> ++ .has_pci = 1,
> ++ .has_ohci0 = 1,
> ++ .has_ehci0 = 1,
> ++ .has_usbd = 1,
> ++
> ++ .has_enetsw = 1,
> ++
> ++ .enetsw = {
> ++ .used_ports = {
> ++ [0] = {
> ++ .used = 1,
> ++ .phy_id = 1,
> ++ .name = "Port 1",
> ++ },
> ++ [1] = {
> ++ .used = 1,
> ++ .phy_id = 2,
> ++ .name = "Port 2",
> ++ },
> ++ [2] = {
> ++ .used = 1,
> ++ .phy_id = 3,
> ++ .name = "Port 3",
> ++ },
> ++ [3] = {
> ++ .used = 1,
> ++ .phy_id = 4,
> ++ .name = "Port 4",
> ++ },
> ++ },
> ++ },
> ++
> ++ .leds = {
> ++ /* front LEDs */
> ++ {
> ++ .name = "F@ST2704V2
> :green:power",
> ++ .gpio = 4,
> ++ .active_low = 1,
> ++ .default_trigger = "default-on",
> ++ },
> ++ {
> ++ .name = "F@ST2704V2:red:power",
> ++ .gpio = 5,
> ++ .active_low = 1,
> ++ },
> ++ {
> ++ .name = "F@ST2704V2:red:inet",
> ++ .gpio = 2,
> ++ .active_low = 1,
> ++ },
> ++ {
> ++ .name = "F@ST2704V2:green:dsl",
> ++ .gpio = 3,
> ++ .active_low = 1,
> ++ },
> ++ {
> ++ .name = "F@ST2704V2:green:inet",
> ++ .gpio = 11,
> ++ .active_low = 1,
> ++ },
> ++ {
> ++ .name = "F@ST2704V2:green:usb",
> ++ .gpio = 1,
> ++ .active_low = 1,
> ++ },
> ++
> ++ /* side button LEDs */
> ++ {
> ++ .name = "F@ST2704V2:green:wps",
> ++ .gpio = 10,
> ++ .active_low = 1,
> ++ },
> ++
> ++ /* FIXME: can't control gpio0 line in "out" state, needs
> further investigation */
> ++ /*
> ++ {
> ++ .name = "F@ST2704V2
> :green:rfkill",
> ++ .gpio = 0,
> ++ .active_low = 1,
> ++ },
> ++ */
> ++
> ++ },
> ++ .buttons = {
> ++ {
> ++ .desc = "reset",
> ++ .gpio = 23,
> ++ .active_low = 1,
> ++ .type = EV_KEY,
> ++ .code = KEY_RESTART,
> ++ .debounce_interval =
> BCM963XX_KEYS_DEBOUNCE_INTERVAL,
> ++ },
> ++ {
> ++ .desc = "wps",
> ++ .gpio = 24,
> ++ .active_low = 1,
> ++ .type = EV_KEY,
> ++ .code = KEY_WPS_BUTTON,
> ++ .debounce_interval =
> BCM963XX_KEYS_DEBOUNCE_INTERVAL,
> ++ },
> ++ {
> ++ .desc = "rfkill",
> ++ .gpio = 15,
> ++ .active_low = 1,
> ++ .type = EV_KEY,
> ++ .code = KEY_WLAN,
> ++ .debounce_interval =
> BCM963XX_KEYS_DEBOUNCE_INTERVAL,
> ++ },
> ++ },
> ++};
> ++
> + static struct board_info __initdata board_rta1025w_16 = {
> + .name = "RTA1025W_16",
> + .expected_cpu_id = 0x6348,
> +@@ -3810,6 +3926,7 @@ static const struct board_info __initcon
> + &board_963281TAN,
> + &board_963281T_TEF,
> + &board_dsl_274xb_f1,
> ++ &board_FAST2704V2,
> + #endif
> + #ifdef CONFIG_BCM63XX_CPU_6338
> + &board_96338gw,
> --
> 1.8.1.5
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
