On Aug 8, 2013, at 10:06 PM, Rafał Miłecki <zaj...@gmail.com> wrote:

> Hey,
> 
> I was doing some tests of ethernet performance on Broadcom's SoCs and
> I may need your advise on that.
> 
> As you know transfers between separated VLANs aren't really nice for
> the CPU. Linux has to receive packets, pass them through the firewall
> and them send to the target VLAN. I'm aware we can't expect full speed
> in that case, but I'm a little worried by the performance anyway.
> 
> I did some tests using "iperf" for various transfers.
> 1) Between two machines in the same VLAN: 710Mb/s
> 2) Between separated VLANs (WAN to LAN): 90Mb/s
> 3) Machine to router (iperf -s on OpenWrt): 180Mb/s

What happens if you try on intra-VLAN traffic on LAN side ?
Are you using a Wan Ethernet ?

> 
> That 90Mb/s speed it pretty slow, there are Internet providers with a
> faster connections in their offer. So I really would like to improve
> that. I know Broadcom managed to get much faster transfers with their
> firmware, so it's definitely do-able.
> 
> Do you have any suggestions on achieving that? I was doing above test
> with some BCM4706 router, in "top" I noticed "sirq" eating 99% of the
> CPU (similar report: https://dev.openwrt.org/ticket/7356).
> 
> Should I play with some profiler?
> /proc/profile (and readprofile user space tool) doesn't support
> profiling modules :(
> I didn't play much time with oprofile yet, unfortunately it's new
> profiling method doesn't support MIPS
> (http://oprofile.sourceforge.net/doc/perf_events.html) - so I have to
> play with legacy profiling method.
> 
> Anyway, maybe you have some suggestions that will help me focus my
> efforts on the right direction?
> 
> -- 
> Rafał
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to