Hi,

 

The 703N can only supply 200mA out the USB port, Its likely this issue is
caused by the device using more power that can be supplied and the device
resetting.

 

TP-Link have a compatibility Martix for devices, It is based on Power
consumption, Not just drivers in stock firmware.

 

Mitch Kelly.

 

From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On
Behalf Of jinzhcheng
Sent: Saturday, 8 June 2013 11:43 PM
To: openwrt-devel@lists.openwrt.org
Subject: [OpenWrt-Devel] 3g disconnect on WR703N

 

Dear All

 

I flash Attitude Adjustment(r36652) image to WR703N, and connect 3g usb
dongle to it.

After establish 3g connection, we find 3g connection disconnect very soon.
But this problem doesn't exist if we connect this usb dongle to another
router.

 

Would you can give me any suggestion? Thanks!

< br>

1. the dmesg log is:

cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)

Button Hotplug driver version 0.4.1

loop: module loaded

PPP generic driver version 2.4.2

tun: Universal TUN/TAP device driver, 1.6

tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>

ip_tables: (C) 2000-2006 Netfilter Core Team

NET: Registered protocol family 24

nf_conntrack version 0.5.0 (966 buckets, 3864 max)

xt_time: kernel timezone is -0000

usbcore: registered new interface driver cdc_acm

cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

usbcore: registered new interface driver usbserial

USB Serial support registered for gene ric

usbcore: registered new interface driver usbserial_generic

usbserial: USB Serial Driver core

input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0

scsi 0:0:0:0: Attached scsi generic sg0 type 5

sd 0:0:0:1: Attached scsi generic sg1 type 0

USB Serial support registered for GSM modem (1-port)

option 1-1:1.0: GSM modem (1-port) converter detected

usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0

option 1-1:1.1: GSM modem (1-port) converter detected

usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1

option 1-1:1.2: GSM modem (1-port) converter detected

usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2

option 1-1:1.3: GSM modem (1-port) converter detected

usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3

usbcore: registered new interface driver option

option: v0.7.2:U SB Driver for GSM modems

fuse init (API version 7.18)

device eth0 entered promiscuous mode

device wlan0 entered promiscuous mode

br-lan: port 2(wlan0) entered forwarding state

br-lan: port 2(wlan0) entered forwarding state

br-lan: port 2(wlan0) entered forwarding state

 

2. The output of logread:

Sep  8 15:50:07 OpenWrt kern.info kernel: usb 1-1: GSM modem (1-port)
converter now attached to ttyUSB3

Sep  8 15:50:07 OpenWrt kern.info kernel: usbcore: registered new interface
driver option

Sep  8 15:50:07 OpenWrt kern.info kernel: option: v0.7.2:USB Driver for GSM
modems

Sep  8 1 5:50:07 OpenWrt kern.info kernel: fuse init (API version 7.18)

Sep  8 15:50:09 OpenWrt user.notice usb-modeswitch: 1-0:1.0:
Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller
Serial=ehci-platform

Sep  8 15:50:09 OpenWrt user.notice usb-modeswitch: 1-1:1.0:
Manufacturer=_EVDO_USB_Modem Product=_EVDO_USB_Modem Serial=Data_Interface

Sep  8 15:50:10 OpenWrt user.notice usb-modeswitch: 1-1:1.1:
Manufacturer=_EVDO_USB_Modem Product=_EVDO_USB_Modem Serial=Data_Interface

Sep  8 15:50:10 OpenWrt user.notice usb-modeswitch: 1-1:1.2:
Manufacturer=_EVDO_USB_Modem Product=_EVDO_USB_Modem Serial=Data_Interface

Sep  8 15:50:10 OpenWrt kern.info kernel: device eth0 entered promiscuous
mode

Sep  8 15:50:10 OpenWrt daemon.notice netifd: Interface 'lan' is now up

Sep  8 15:50:10 OpenWrt daemon.notice netifd: Interface 'loopback' is now up

Sep  8 15:50:10 OpenW rt user. notice usb-modeswitch: 1-1:1.3:
Manufacturer=_EVDO_USB_Modem Product=_EVDO_USB_Modem Serial=Data_Interface

Sep  8 15:50:10 OpenWrt user.notice usb-modeswitch: 1-1:1.4:
Manufacturer=_EVDO_USB_Modem Product=_EVDO_USB_Modem Serial=Data_Interface

Sep  8 15:50:11 OpenWrt daemon.notice pppd[837]: pppd 2.4.5 started by root,
uid 0

Sep  8 15:50:11 OpenWrt user.notice ifup: Enabling Router Solicitations on
lan (br-lan)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: abort on (BUSY)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: abort on (NO CARRIER)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: abort on (ERROR)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: abort on (NO DIAL TONE)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: abort on (NO ANSWER)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: abort on (DELAYED)

Sep  8 15:50:12 OpenWrt local2.i nfo chat[880]: report (CONNECT)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: timeout set to 10 seconds

Sep  8 15:50:12 OpenWrt local2.info chat[880]: send (AT^M)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: expect (OK)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: ^M

Sep  8 15:50:12 OpenWrt local2.info chat[880]: OK

Sep  8 15:50:12 OpenWrt local2.info chat[880]:  -- got it

Sep  8 15:50:12 OpenWrt local2.info chat[880]: send (ATZ^M)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: timeout set to 30 seconds

Sep  8 15:50:12 OpenWrt local2.info chat[880]: expect (OK)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: ^M

Sep  8 15:50:12 OpenWrt local2.info chat[880]: ^M

Sep  8 15:50:12 OpenWrt local2.info chat[880]: OK

Sep  8 15:50:12 OpenWrt local2.info chat[880]:  -- got it

S ep  8 15:50:12 OpenWrt local2.info chat[880]: send (ATDT#777^M)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: expect (CONNECT)

Sep  8 15:50:12 OpenWrt local2.info chat[880]: ^M

Sep  8 15:50:13 OpenWrt local2.info chat[880]: ^M

Sep  8 15:50:13 OpenWrt local2.info chat[880]: CONNECT

Sep  8 15:50:13 OpenWrt local2.info chat[880]:  -- got it

Sep  8 15:50:13 OpenWrt local2.info chat[880]: send (^M)

Sep  8 15:50:13 OpenWrt daemon.info pppd[837]: Serial connection
established.

Sep  8 15:50:13 OpenWrt daemon.info pppd[837]: Using interface 3g-wan

Sep  8 15:50:13 OpenWrt daemon.notice pppd[837]: Connect: 3g-wan <-->
/dev/ttyUSB0

Sep  8 15:50:15 OpenWrt daemon.info pppd[837]: CHAP authentication
succeeded: Welcome to JSTELECOM.

Sep  8 15:50:15 OpenWrt daemon.notice pppd[837]: CHAP authentication
succeeded< /div>Sep  8 15:50:15 OpenWrt daemon.notice pppd[837]: local  IP
address 10.32.186.241

Sep  8 15:50:15 OpenWrt daemon.notice pppd[837]: remote IP address
172.25.11.10

Sep  8 15:50:15 OpenWrt daemon.notice pppd[837]: primary   DNS address
61.177.7.1

Sep  8 15:50:15 OpenWrt daemon.notice pppd[837]: secondary DNS address
218.2.135.1

Sep  8 15:50:15 OpenWrt daemon.notice netifd: Interface 'wan' is now up

Sep  8 15:50:17 OpenWrt user.notice ifup: Enabling Router Solicitations on
loopback (lo)

Sep  8 15:50:18 OpenWrt kern.info kernel: device wlan0 entered promiscuous
mode

Sep  8 15:50:18 OpenWrt kern.info kernel: br-lan: port 2(wlan0) entered
forwarding state

Sep  8 15:50:18 OpenWrt kern.info kernel: br-lan: port 2(wlan0) entered
forwarding state

Sep  8 15:50:19 OpenWrt user.notice ifup: Enabling Router Solicitations on
wan (3g-wan)

Se p  8 15:50:20 OpenWrt kern.info kernel: br-lan: port 2(wlan0) entered
forwarding state

Sep  8 15:50:21 OpenWrt daemon.info hostapd: wlan0: STA 68:a3:c4:64:66:14
IEEE 802.11: authenticated

Sep  8 15:50:22 OpenWrt daemon.info hostapd: wlan0: STA 68:a3:c4:64:66:14
IEEE 802.11: associated (aid 1)

Sep  8 15:50:25 OpenWrt user.info sysinit: Loading defaults

Sep  8 15:50:25 OpenWrt user.info sysinit: Loading synflood protection

Sep  8 15:50:26 OpenWrt user.info sysinit: Adding custom chains

Sep  8 15:50:26 OpenWrt user.info sysinit: Loading zones

Sep  8 15:50:27 OpenWrt user.info sysinit: Loading forwardings

Sep  8 15:50:27 OpenWrt user.info sysinit: Loading rules

Sep  8 15:50:27 OpenWrt user.info sysinit: Loading redirects

Sep  8 15:50:27 OpenWrt user.info sysinit: Loading includes

Sep  8 15:50:27 OpenWrt user.inf o sysini t: Optimizing conntrack

Sep  8 15:50:27 OpenWrt user.info sysinit: Loading interfaces

Sep  8 15:50:28 OpenWrt user.info firewall: adding lan (br-lan) to zone lan

Sep  8 15:50:28 OpenWrt user.info firewall: adding wan (3g-wan) to zone wan

Sep  8 15:50:30 OpenWrt auth.info sshd[1926]: Server listening on 0.0.0.0
port 22.

Sep  8 15:50:32 OpenWrt daemon.info hostapd: wlan0: STA 68:a3:c4:64:66:14
IEEE 802.11: authenticated

Sep  8 15:50:32 OpenWrt daemon.info hostapd: wlan0: STA 68:a3:c4:64:66:14
IEEE 802.11: associated (aid 1)

Sep  8 15:50:32 OpenWrt user.notice dnsmasq: DNS rebinding protection is
active, will discard upstream RFC1918 responses!

Sep  8 15:50:32 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq[1993]: started, version 2.62
cachesize 150

Sep  8 15:50:36 OpenWrt da emon.inf o dnsmasq[1993]: compile time options:
no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP
no-conntrack

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq-dhcp[1993]: DHCP, IP range
192.168.22.100 -- 192.168.22.249, lease time 12h

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq[1993]: using local addresses
only for domain lan

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq[1993]: reading
/tmp/resolv.conf.auto

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq[1993]: using nameserver
61.177.7.1#53

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq[1993]: using nameserver
218.2.135.1#53

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq[1993]: using local addresses
only for domain lan

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq[1993]: read /etc/hosts - 1
addresses

Sep  8 15:50:36 OpenWrt daemon.info dnsmasq-dhcp[1993]: read /etc/ethers - 0
addresses

Sep  8 15:50: 38 OpenW rt daemon.info dnsmasq-dhcp[1993]:
DHCPREQUEST(br-lan) 192.168.22.178 68:a3:c4:64:66:14 

Sep  8 15:50:38 OpenWrt daemon.info dnsmasq-dhcp[1993]: DHCPACK(br-lan)
192.168.22.178 68:a3:c4:64:66:14 sinkin-ThinkPad-T420

Jun  8 15:06:50 OpenWrt daemon.info pppd[837]: System time change detected.

Jun  8 15:15:07 OpenWrt daemon.info hostapd: wlan0: STA 00:1c:bf:c8:bb:44
IEEE 802.11: authenticated

Jun  8 15:15:07 OpenWrt daemon.info hostapd: wlan0: STA 00:1c:bf:c8:bb:44
IEEE 802.11: associated (aid 2)

Jun  8 15:15:10 OpenWrt daemon.info dnsmasq-dhcp[1993]: DHCPDISCOVER(br-lan)
192.168.1.101 00:1c:bf:c8:bb:44 

Jun  8 15:15:10 OpenWrt daemon.info dnsmasq-dhcp[1993]: DHCPOFFER(br-lan)
192.168.22.152 00:1c:bf:c8:bb:44 

Jun  8 15:15:10 OpenWrt daemon.info dnsmasq-dhcp[1993]: DHCPREQUEST(br-lan)
192.168.22.152 00:1c:bf:c8:bb:44 

Jun  8 15:15:10 OpenWrt daemon. info dnsmasq-dhcp[1993]: DHCPACK(br-lan)
192.168.22.152 00:1c:bf:c8:bb:44 513d0cd75d5640b

Jun  8 15:18:12 OpenWrt daemon.info pppd[837]: No response to 10
echo-requests

Jun  8 15:18:12 OpenWrt daemon.notice pppd[837]: Serial link appears to be
disconnected.

Jun  8 15:18:12 OpenWrt daemon.info pppd[837]: Connect time 12.0 minutes.

Jun  8 15:18:12 OpenWrt daemon.info pppd[837]: Sent 43242 bytes, received
53310 bytes.

Jun  8 15:18:12 OpenWrt daemon.notice netifd: Interface 'wan' has lost the
connection

Jun  8 15:18:13 OpenWrt user.info firewall: removing wan (3g-wan) from zone
wan

Jun  8 15:18:18 OpenWrt daemon.notice pppd[837]: Connection terminated.

Jun  8 15:18:42 OpenWrt daemon.warn dnsmasq[1993]: no servers found in
/tmp/resolv.conf.auto, will retry

 

3. Our 3g.chat:

ABORT   BUSY

ABORT   'NO CARRIER'

ABORT   ERROR

REPORT  CONNECT

TIMEOUT 10

OK      "AT&FE0V1X1&D2&C1S0=0"

OK      "AT&FE0V1X1&D2&C1S0=0"

SAY     "Calling EVDO"

TIMEOUT 30

OK      "ATDT#777"

CONNECT ' '

 

4. The network config:

config interface 'loopback'

        option ifname 'lo'

    &nbs p;   ; option proto 'static'

        option ipaddr '127.0.0.1'

        option netmask '255.0.0.0'

 

config interface 'lan'

        option ifname 'eth0'

        option type 'bridge'

        option proto 'static'

        option ipaddr '192.168.22.1'

        option netmask '255.255.255.0'

 

config 'interface' 'wan'

        option 'ifname' 'ppp0'

        option 'proto' '3g'

        option 'service' 'evdo'

        option 'device' '/dev/ttyUSB0'

        option 'username' 'CARD'

        option 'password' 'CARD'

        option 'au to' '1'< /div>

 

5. The option of ppp:

logfile /dev/null

noipdefault

noaccomp

nopcomp

nocrtscts

lock

maxfail 0

lcp-echo-failure 10

lcp-echo-interval 3

 

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to