Hi Drasko and Jon,
Le 16/04/2013 17:54, Drasko DRASKOVIC a écrit :
Hi Jon,
I guess that you can push Ralink for this, but I have bot seen these
sources on the web.
The closest I got is 8Devices' Carambola u-boot, as they have probably
demanded sources from Ralink : https://github.com/8devices/u-boot
I can see in the code rt2880_config, but Carambola has RT3050 and uses
this U-Boot, so there is a goot chacnce that it can work on RT5350
also.
It looks like the RT5350 is fully supported into 8Devices U-Boot, for example:
<https://github.com/8devices/u-boot/blob/master/lib_mips/board.c#L177>
-Michel
BR,
Drasko
On Tue, Apr 16, 2013 at 5:41 PM, jonsm...@gmail.com <jonsm...@gmail.com> wrote:
On Fri, Apr 12, 2013 at 7:09 PM, Drasko DRASKOVIC
<drasko.drasko...@gmail.com> wrote:
Hi Jon,
On Fri, Apr 12, 2013 at 8:42 PM, jonsm...@gmail.com <jonsm...@gmail.com>
wrote:
On Tue, Apr 9, 2013 at 6:42 PM, jonsm...@gmail.com <jonsm...@gmail.com>
wrote:
I put two and two together and figured out that those are the names
from the Ralink reference design, not the datasheet. So based on that
observation....
Toplink has confirmed this to be the correct pin out. I've ordered 20
boards
as samples. 8MB flash/ 32MB RAM / chip antenna. I'll let everyone know
how
they perform when they get here.
Thanks a lot for your effort !
I am in the process of ordering these boards, so we will work on this
one also. They are coming with Ralink SDK, and I am interested to see
how this can be integrated into OpenWRT.
Also, U-Boot is not delivered, so I guess it would be interesting to
see if 8th devices U-Boot will work with these boards.
I have confirmed that these boards will ship with empty flash unless you buy
a Ralink license. There is a single Ralink license for everything, they
don't break it out.
Uboot is GPL and Ralink is using uboot. So there should be GPL source to
their uboot somewhere. Has anyone tried getting the uboot source out of
Ralink/Mediatek? It might be sitting on a server somewhere. So first problem
is getting some kind of uboot into the flash.
I also think you need to order these with the L7/U5 population option, that
will make the 1.8V for the Ethernet transformer CT.
In any case, most interesting low-cost board I could find, and it
would be really beneficial to have OpenWRT support for these.
Best regards,
Drasko
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
Jon Smirl
jonsm...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
