Yes, I have seen these boards and contacted suppliers. they seem really responsive.
I am missing some more flash though. 8MB is just enough, but it seems like RT5350 chipset does not support more. John, do you know what would be the best way to augment flash on these? Some cheap NAND? SD Card? What would be the best solution? BR, Drasko On Tue, Apr 9, 2013 at 12:21 AM, jonsm...@gmail.com <jonsm...@gmail.com> wrote: > It will be a while for the boards to arrive from China. But they look > really good. 8MB flash, 32MB RAM for less than the $7.50 quotes on > Aliaba. Chip antenna or IPEX. JTAG on connector > > The one with pins supports one Ethernet. The pseudo-miniPCIe one > supports two Ethernet. > > On Mon, Apr 8, 2013 at 6:12 PM, Wojciech Kromer > <wojciech.kro...@dgt.com.pl> wrote: >> >>> If so, >>> then I can load it into RAM via JTAG, jump to it and get flash >>> commands? That will let me initialize an empty flash. >> >> This scenario works fine with rt3352, just try... >> >>> Doesn't look like MIPS has the small SRAM region like ARM does. Is >>> there a write up around somewhere on how to get going with a JTAG on >>> these chips? >> >> I'm not very familiar with rt5350, but >> DDRAM setup should be done with bootstrap pins like on rt3352, >> so you can just try to use whole DDRAM. >> >> Best regards. >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > > > -- > Jon Smirl > jonsm...@gmail.com > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
