It will be a while for the boards to arrive from China. But they look really good. 8MB flash, 32MB RAM for less than the $7.50 quotes on Aliaba. Chip antenna or IPEX. JTAG on connector
The one with pins supports one Ethernet. The pseudo-miniPCIe one supports two Ethernet. On Mon, Apr 8, 2013 at 6:12 PM, Wojciech Kromer <wojciech.kro...@dgt.com.pl> wrote: > >> If so, >> then I can load it into RAM via JTAG, jump to it and get flash >> commands? That will let me initialize an empty flash. > > This scenario works fine with rt3352, just try... > >> Doesn't look like MIPS has the small SRAM region like ARM does. Is >> there a write up around somewhere on how to get going with a JTAG on >> these chips? > > I'm not very familiar with rt5350, but > DDRAM setup should be done with bootstrap pins like on rt3352, > so you can just try to use whole DDRAM. > > Best regards. > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel -- Jon Smirl jonsm...@gmail.com _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
