On 03/29/2013 01:47 AM, Chirag Chhatriwala wrote:
> 
> 
> 
> On Thu, Mar 28, 2013 at 7:19 PM, Hauke Mehrtens <ha...@hauke-m.de
> <mailto:ha...@hauke-m.de>> wrote:
> 
> 
>     You need the bgmac Ethernet driver and wifi should be supported by b43,
>     brcmsmac or wl. The 5GHz wifi will not work in 5GHz mode and it could
>     work in 2.4 GHZ mode with b43.
> 
>     Select a profile with "all Ethernet" or "bgmac Ethernet".
> 
>     Hauke
> 
> 
> Strange, I thought the 5GHz wifi would work with broadcom-wl driver as
> it is expected.
> Am I missing something? 
> 
No, broacom-wl only supports old wifi devices and no new cores released
in the last ~4 years. The 5GHz wifi supports 450MBit/s so it is a
BCM4331 with a HT-Phy and this is only supported by b43 with ieee80211g
rates and in the 2.4 GHz band. This wifi will probably not work at all
because it was not designed and programmed to be used in the 2.4GHz
band. The 2.4GHz wifi of the BCM4718 should work with b43, brcmsmac or
broadcom-wl.

Hauke
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to