Hi All, I'm just about ready to solder on some header pins and connect my E4200 via the serial/uart console. In the meantime, what is the correct Target profile to make sure my router's ethernet and wifi work without any issues (on my own build of openwrt trunk).
Broadcom SoC, all Ethernet, BCM43xx WiFi (b43, default) *Broadcom SoC, all Ethernet, BCM43xx WiFi (wl, proprietary) * Broadcom SoC, all Ethernet, Atheros WiFi (ath5k) Broadcom SoC, all Ethernet, No WiFi Broadcom SoC, b44 Ethernet, BCM43xx WiFi (b43, default) Broadcom SoC, b44 Ethernet, BCM43xx WiFi (wl, proprietary) Broadcom SoC, b44 Ethernet, Atheros WiFi (ath5k) Broadcom SoC, b44 Ethernet, No WiFi Broadcom SoC, tg3 Ethernet, BCM43xx WiFi (b43) Broadcom SoC, tg3 Ethernet, BCM43xx WiFi (wl, proprietary) Broadcom SoC, tg3 Ethernet, no WiFi Broadcom SoC, bgmac Ethernet, BCM43xx WiFi (bgmac) *Broadcom SoC, bgmac Ethernet, BCM43xx WiFi (wl, proprietary) * Broadcom SoC, bgmac Ethernet, No WiFi *Bold* ones are the ones I think are correct but just not sure. Thanks, Chirag
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
