Hi All, I'm trying to get additional info.
Hauke: per your latest response indicating the changeset: https://dev.openwrt.org/changeset/35597 This will not work for E4200v1. I just dug a few things from the tomato source tree. Line 36: http://repo.or.cz/w/tomato.git/blob/tomato-RT:/release/src/router/shared/id.c Shows much of the E4200 v1 board related identification Also: http://repo.or.cz/w/tomato.git/blob/tomato-RT:/release/src/router/rc/init.c shows vlan[01]ports initializations settings, which do not match the patch you mention. I am not sure what else is needed to make sure the proper initializations are in place for the switch to come up. Wifi (according to broadcom-wl) should just work. However, I'm worried more about the switch. Thanks, Chirag On Thu, Feb 14, 2013 at 7:41 AM, Hauke Mehrtens <ha...@hauke-m.de> wrote: > On 02/14/2013 07:30 AM, Nathan Hintz wrote: > > On Wed, 2013-02-13 at 19:03 -0800, Nathan Hintz wrote: > >> On Wed, 2013-02-13 at 22:46 +0100, Hauke Mehrtens wrote: > >>> On 02/13/2013 10:33 PM, Chirag Chhatriwala wrote: > >>>> Hi All, > >>>> > >>>> I've notcied a huge deal of progress with bgmac in the recent month > and > >>>> was willing to help bring support for the E4200v1. I own one of these > >>>> devices but I'm not too familiar with the entire driver process. > Also, I > >>>> haven't flashed anything via serial/uart or JTAG as I'm simply > familiar > >>>> with flashing via tftp method. > >>>> > >>>> I've reached out to Rafal and Nathan for advice as well. > >>>> > >>>> Firstly, I wanted to know if there is anyone who owns one of these and > >>>> can help with enabling OpenWrt support. I can certainly help in any > way > >>>> I can. I'm sure there are several folks out there who own one of these > >>>> and I could mean a lot to revive their E4200v1 with OpenWrt support. > >>>> > >>>> I simply wish I had another one of these to donate to the OpenWrt devs > >>>> for the cause. > >>>> > >>>> Thanks, > >>>> Chirag > >>>> > >>> Hi Chirag, > >>> > >>> Your device should work, at least Ethernet wifi probably not. When you > >>> have a serial console connected to your device just flash OpenWrt or > >>> boot it from the network and report your results. > >>> > >>> Hauke > >>> _______________________________________________ > >>> openwrt-devel mailing list > >>> openwrt-devel@lists.openwrt.org > >>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > >>> > >> Will the ethernet work if the device is not recognized > >> by /etc/init.d/netconfig? It sounded like it had a different nvram > >> value for "boardtype"? > >> > >> I've never booted my E3000 from the network, and tftp only works for me > >> from a serial console using "upgrade code.bin" (I think my CFE is > >> possibly broken). What command do you use when you boot from the > >> network; and do you need a factory ".bin" image, or does the generic > >> ".trx" work for this? > >> > >> Thanks, > >> > >> Nathan > > > > Hi Hauke: > > > > I saw that /etc/init.d/netconfig has additional "boardtype" values > > added. Is the E4200v1 one of those added? Chirag didn't have an nvram > > dump, but he had a reference to a tomato issue that indicated it might > > be "0xF52C". Also, a patch had been added to the set maintained at > > > http://www.znau.edu.ua/temp/asus-rt-n16/2012-12-08T15-25/003-openwrt4716-TARGET_brcm4716-Linksys-E2000.patch > > that indicated the E2000 has a "boardtype" of "0x04EF"; although the > > same tomato reference has that one in lower case for WRT320N/E2000. > > This list would have never been complete so now it is checked where the > CPU port is and if it is port 8, this port is used instead of port 5 in > the default switch configuration, see [0]. > > Hauke > > [0]: https://dev.openwrt.org/changeset/35597 > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
