On Wed, 2013-02-13 at 22:46 +0100, Hauke Mehrtens wrote: > On 02/13/2013 10:33 PM, Chirag Chhatriwala wrote: > > Hi All, > > > > I've notcied a huge deal of progress with bgmac in the recent month and > > was willing to help bring support for the E4200v1. I own one of these > > devices but I'm not too familiar with the entire driver process. Also, I > > haven't flashed anything via serial/uart or JTAG as I'm simply familiar > > with flashing via tftp method. > > > > I've reached out to Rafal and Nathan for advice as well. > > > > Firstly, I wanted to know if there is anyone who owns one of these and > > can help with enabling OpenWrt support. I can certainly help in any way > > I can. I'm sure there are several folks out there who own one of these > > and I could mean a lot to revive their E4200v1 with OpenWrt support. > > > > I simply wish I had another one of these to donate to the OpenWrt devs > > for the cause. > > > > Thanks, > > Chirag > > > Hi Chirag, > > Your device should work, at least Ethernet wifi probably not. When you > have a serial console connected to your device just flash OpenWrt or > boot it from the network and report your results. > > Hauke > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > Will the ethernet work if the device is not recognized by /etc/init.d/netconfig? It sounded like it had a different nvram value for "boardtype"?
I've never booted my E3000 from the network, and tftp only works for me from a serial console using "upgrade code.bin" (I think my CFE is possibly broken). What command do you use when you boot from the network; and do you need a factory ".bin" image, or does the generic ".trx" work for this? Thanks, Nathan _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
