On 12/23/2012 01:49 PM, hhm wrote: > Hi, > > Until recently (including with the RC1 release of OpenWrt Attitude > Adjustment) things were working ok on the linksys e1000 (besides the > things which were not ready then). > > However, using recent builds of trunk (built by me, and built by > http://downloads.openwrt.org/snapshots/), the serial flash does not > work (for comparing, see logs from when working at > https://forum.openwrt.org/viewtopic.php?pid=179178#p179178): > ... > [ 0.000000] bus0: Unsupported ST serial flash (id: 0x15, id2: 0x15) ... > > I tried building without patches 060 and 070 from > target/linux/brcm47xx/patches/3.3/, since I thought maybe these were > the cause; however, the same problem occurs without those patches > included; this leads me to think that maybe it is a regression in the > kernel? > > It would be greatly appreciated if someone knows what is causing this > regression, and how to solve it. > > The thread https://forum.openwrt.org/viewtopic.php?id=26896 deals with > getting OpenWrt to boot on a hardware-identical router (wrt160nv3), > and it seems the issue there was the flash; however, that does not > explain why it was working before, but not now. > > I am working on this; it seems from the thread on wrt160nv3 etc. that > it might be kernel config so im trying that, but even if that works, > should it be re-enabled in trunk? > > Thanks.
Thank you for reporting this bug, I do not monitor the forum and do not see when somebody reports a bug there, I just monitor the mailing lists and trac. This should be fixed in r34900. Hauke _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
