Actually shouldn't matter. If using right config option (under Image options IRC) then there will be an uci-defaults file that runs on firstboot to set the ipaddr, which should occur after the defconfig configuration. At least that's the intended design; if the order of scripts is wrong then that's a bug.
Regards, Daniel On 29/11/2012 5:21 PM, Hannu Nyman wrote: > You mentioned later in the thread that you are building for wndr3800. > That is the key info here. > > Due to complex switch port LED defintions, WNDR3700/3800 has a > dedicated network file template that will be used: > https://dev.openwrt.org/browser/trunk/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network > > > It has the section: > config interface lan > option ifname eth0.1 > option type bridge > option proto static > option ipaddr 192.168.1.1 > option netmask 255.255.255.0 > > > On 29.11.2012 1:38, John Lauro wrote: >> Is there a place to change the default IP for a firmware build? >> >> I tried setting under Image configuration -> Preinit configuration >> options -> IP address for preinit network messages, but that doesn't >> seem to work (not that I expected to, but it's the only config >> options I could find related to an IP address). Doing a search of my >> build tree, 192.168.1.1 seems to be embedded in several spots. >> >> > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel -- Daniel Dickinson PowerCloud Systems, Palo Alto, CA Senior Firmware Engineer (In Canada: Senior Firmware Analyst)
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
