I tried preinit and also .../trunk/package/base-files/files/etc/config/network .../trunk/target/linux/ar7/base-files/etc/config/network
and it still comes out as 192.168.1.1. (building for a wndr3800) Seems to be lots of network files. I guess I could have the wrong one? The bin comes out under ar711x. ----- Original Message ----- From: "Weedy" <weedy2...@gmail.com> To: openwrt-devel@lists.openwrt.org Sent: Wednesday, November 28, 2012 7:21:25 PM Subject: Re: [OpenWrt-Devel] Change Default IP? On 28/11/12 06:38 PM, John Lauro wrote: > Is there a place to change the default IP for a firmware build? > > I tried setting under Image configuration -> Preinit configuration options -> > IP address for preinit network messages, but that doesn't seem to work (not > that I expected to, but it's the only config options I could find related to > an IP address). Doing a search of my build tree, 192.168.1.1 seems to be > embedded in several spots. > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > Preinit configuration has always worked for me. You can use the more heavy handed $TOPDIR/files/etc/config/network if it is not working. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
