Hi, thanks for the input. We will try it on our board.
However let me make a significant observation:
We had the same problem with USB: Our SW was working on an EASY board
but not on our HW. We thought it was hardware problem (but found
everything OK). After getting a patch from you it worked on our board
too!!! Now we are in the same situation with DSL. Our SW works on the
EASY board (v1.24) but not on our board. We hope that this patch will
make it work. However we will also probe the DSL API and send you the
logs reported by our board and the EASY. We've checked our HW
intensively. There is no error (voltage levels, signals, everything seem
perfect)!!.
To me it seems as a short of mismatch in the Danube versions. Our EASY
has Danube v1.3, while our board has Danube v1.4. In your logs I see
that you have Danube v1.5!!! It may be a source of incompatibility
problems. Also our EASY board is v1.24, while today there are v3.1
available!!!
Spiros
On 24/05/2012 14:45, Conor O'Gorman wrote:
On Thu, 2012-05-24 at 13:43 +0200, John Crispin wrote:
On 24/05/12 13:41, Conor O'Gorman wrote:
That patch didn't work. The -i is necessary. It's also a critical param,
as the first setting seems to stick till reboot. Which is annoying, as
all subsequent tests are pointless.
Anyway, going back to the bare -i works.
The xtu value is perhaps wrong for annex a2p?
network.adsl.fwannex=a
network.adsl.annex=a2p
annex_a2p=00_00_00_00_00_01_00_00
It works with just the default changed. Or user config change to 'a'.
uci set network.adsl.annex=a
The default a2p (adsl2+) is perhaps too strict? The 'a' option includes
all 'a' variations:
annex_a=04_01_04_00_00_01_00_00
annex_at1=01_00_00_00_00_00_00_00
annex_alite=00_01_00_00_00_00_00_00
annex_admt=04_00_00_00_00_00_00_00
annex_a2=00_00_04_00_00_00_00_00
annex_a2p=00_00_00_00_00_01_00_00
Conor
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
Best Regards,
Spyridon Tompros
----------------------------------------
Dr. Ing. Spyridon Tompros
36 GE Lebon, 1160 Brussels
tel:+322.5133076
www.qualtek.eu
----------------------------------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
