On Tue, 2012-05-22 at 14:01 +0200, John Crispin wrote: > On 21/05/12 22:14, Spyridon Tompros wrote: > > On 21/05/2012 18:16, John Crispin wrote: > >> On 21/05/12 17:48, Spyridon Tompros wrote: > >>> Hi all, > >>> > >>> currently we test our last left-for-testing xDSL interface. The Danube > >>> tries to synchronise but without result. Might be a SW problem of the > >>> OpenWRT trunk version we use. Our HW is totally identical to that of > >>> Lantiq's RDK. We've also used the add-on front-end of Lantiq's RDK in > >>> the place of ours with the same results. > >> So you mean that you plug a cable into the AFE and you get no link > >> resulting in no showtime ? Did you try the same image on a easy50712 ? > > Exactly (periodically reports "leaving showtime"). We've checked it on > > an easy RDK. It works but marginally. (Takes too much time to get > > connected) while Danube gets very hot. > >> > > Ok, so it works but the experience is "its slow". >
Hmm, I've tried it here on a custom board. A backfire based old image gets to showtime. Recent trunk build does not. Some logs: -------------------------------------------------------- Old Backfire working -------------------------------------------------------- [ 19.072000] IFX MEI Version 5.00.00 [ 19.308000] [ 19.308000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4 [ 19.360000] Infineon Technologies ATM driver version 1.0.8 [ 19.360000] Infineon Technologies ATM (A1) firmware version 0.1 [ 19.368000] ifxmips_atm: ATM init succeed [ 19.636000] dwc_otg: version 2.60a 22-NOV-2006 root@OpenWrt:/tmp# dsl_cpe_control -f /lib/firmware/ModemHWE.bin -m -c DSL_CPE: Using message dump (debug level: 0x80) DSL_CPE: Device /dev/dsl_cpe_api opened successfully DSL_CPE: Welcome to the CLI interface of DSL CPE API DSL_CPE: Enter 'help all' for a list of built-in commands. DSL_CPE: failed to set message dump debug level for device 0! sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000000 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=3 nFirmwareRequestType=1 sEventType=DSL_EVENT_S_LINE_STATE nLineState=000000FF sEventType=DSL_EVENT_S_FIRMWARE_DOWNLOAD_STATUS nError=0 nFwType=1 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=2 nFirmwareRequestType=0 sEventType=DSL_EVENT_S_LINE_POWERMANAGEMENT_STATE nPowerManagementStatus=DSL_G997_PMS_L3 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000100 DSL_CPE#>sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000200 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000300 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000380 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000800 sEventType=DSL_EVE[ 722.068000] [DSL_BSP_Showtime 916]: Datarate US intl = 256000, fast = 0 NT_S_LINE_POWERMANAGEMENT_STATE nPowerManagementStatus=DSL_G997_PMS_L0 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000801 Sep 8 16:06:54 OpenWrt user.err kernel: [ 722.068000] [DSL_BSP_Showtime 916]: Datarate US intl = 256000, fast = 0 Sep 8 16:06:55 OpenWrt daemon.warn pppd[1016]: Timeout waiting for PADO packets Sep 8 16:06:55 OpenWrt daemon.err pppd[1016]: Unable to complete PPPoE Discovery -------------------------------------------------------- Trunk not working -------------------------------------------------------- [ 8.848000] IFX MEI Version 5.00.00 [ 8.888000] [ 8.888000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4 [ 8.928000] ATM (A1) firmware version 1.0.19 [ 8.932000] ifxmips_atm: ATM init succeed [ 8.964000] IFXUSB: ifxusb_hcd: version 3.0alpha B100312 root@OpenWrt:/tmp# dsl_cpe_control -f /lib/firmware/ModemHWE.bin -m -c DSL_CPE: Using message dump (debug level: 0x80) DSL_CPE: Device /dev/dsl_cpe_api opened successfully DSL_CPE: Welcome to the CLI interface of DSL CPE API DSL_CPE: Enter 'help all' for a list of built-in commands. DSL_CPE: failed to set message dump debug level for device 0! sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000000 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=3 nFirmwareRequestType=1 sEventType=DSL_EVENT_S_LINE_STATE nLineState=000000FF sEventType=DSL_EVENT_S_FIRMWARE_DOWNLOAD_STATUS nError=0 nFwType=1 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=2 nFirmwareRequestType=0 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000100 DSL_CPE#>sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000200 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000300 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000001 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000000 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=3 nFirmwareRequestType=1 sEventType=DSL_EVENT_S_FIRMWARE_REQUEST nFirmwareRequestType=DSL_FW_REQUEST_ADSL sEventType=DSL_EVENT_S_LINE_STATE nLineState=000000FF sEventType=DSL_EVENT_S_FIRMWARE_DOWNLOAD_STATUS nError=0 nFwType=1 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=2 nFirmwareRequestType=0 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000100 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000200 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000300 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000001 sEventType=DSL_EVENT_S_LINIT_FAILURE lineInitStatusData=LINIT_COMMUNICATION_PROBLEM sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000000 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=3 nFirmwareRequestType=1 sEventType=DSL_EVENT_S_FIRMWARE_REQUEST nFirmwareRequestType=DSL_FW_REQUEST_ADSL sEventType=DSL_EVENT_S_LINE_STATE nLineState=000000FF sEventType=DSL_EVENT_S_FIRMWARE_DOWNLOAD_STATUS nError=0 nFwType=1 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=2 nFirmwareRequestType=0 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000100 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000200 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000300 sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000001 sEventType=DSL_EVENT_S_LINIT_FAILURE lineInitStatusData=LINIT_COMMUNICATION_PROBLEM sEventType=DSL_EVENT_S_LINE_STATE nLineState=00000000 sEventType=DSL_EVENT_S_AUTOBOOT_STATUS nStatus=3 nFirmwareRequestType=1 sEventType=DSL_EVENT_S_FIRMWARE_REQUEST nFirmwareRequestType=DSL_FW_REQUEST_ADSL sEventType=DSL_EVENT_S_LINE_STATE nLineState=000000FF Conor _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
