Hi, On Fri, May 18, 2012 at 1:04 AM, Tobias Diedrich <ranma+open...@tdiedrich.de> wrote: > rt2800: Initialize max_txpower to MAX_G_TXPOWER and MAX_A_TXPOWER > respectively, similar to how it is already done in rt2[45]00pci.c > > rt2800lib.c doesn't initialize max_power and thus after > http://git.kernel.org/?p=linux/kernel/git/linville/wireless-next.git;a=commitdiff;h=eccc068e8e84c8fe997115629925e0422a98e4de > was applied txpower is limited to 0 for these devices. > > This should be the proper fix compared to the net/wireless/reg.c > hack in http://patchwork.openwrt.org/patch/2165/ > > (Patch against the OpenWRT compat-wireless version, but applies > equally well against wireless-next with a 19-line offset) > > Signed-off-by: Tobias Diedrich <ranma+open...@tdiedrich.de> > > > Index: compat-wireless-2012-04-17/drivers/net/wireless/rt2x00/rt2800lib.c > =================================================================== > --- compat-wireless-2012-04-17.orig/drivers/net/wireless/rt2x00/rt2800lib.c > 2012-05-18 00:25:22.515271380 +0200 > +++ compat-wireless-2012-04-17/drivers/net/wireless/rt2x00/rt2800lib.c > 2012-05-18 00:28:48.809658951 +0200 > @@ -4622,6 +4622,7 @@ > default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); > > for (i = 0; i < 14; i++) { > + info[i].max_power = MAX_G_TXPOWER;
31dBm? That's ~1.3W. I'd say we have to find a different way to deal with this issue. Theoretically the device eeprom contains the allowed max tx power in EEPROM_EIRP_MAX_TX_POWER however most devices don't use this value at all :( so we cannot rely on it for most devices. Typically the ralink devices are calibrated for 100% tx power. However, without EEPROM_EIRP_MAX_TX_POWER we don't know the real tx power of the device at all (have to consider antenna gain which should be part of EEPROM_EIRP_MAX_TX_POWER). So, maybe we should do it the safe way and just register a safe default of 20dBm for all channels? Helmut _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
