rt2800: Initialize max_txpower to MAX_G_TXPOWER and MAX_A_TXPOWER respectively, similar to how it is already done in rt2[45]00pci.c
rt2800lib.c doesn't initialize max_power and thus after http://git.kernel.org/?p=linux/kernel/git/linville/wireless-next.git;a=commitdiff;h=eccc068e8e84c8fe997115629925e0422a98e4de was applied txpower is limited to 0 for these devices. This should be the proper fix compared to the net/wireless/reg.c hack in http://patchwork.openwrt.org/patch/2165/ (Patch against the OpenWRT compat-wireless version, but applies equally well against wireless-next with a 19-line offset) Signed-off-by: Tobias Diedrich <ranma+open...@tdiedrich.de> Index: compat-wireless-2012-04-17/drivers/net/wireless/rt2x00/rt2800lib.c =================================================================== --- compat-wireless-2012-04-17.orig/drivers/net/wireless/rt2x00/rt2800lib.c 2012-05-18 00:25:22.515271380 +0200 +++ compat-wireless-2012-04-17/drivers/net/wireless/rt2x00/rt2800lib.c 2012-05-18 00:28:48.809658951 +0200 @@ -4622,6 +4622,7 @@ default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); for (i = 0; i < 14; i++) { + info[i].max_power = MAX_G_TXPOWER; info[i].default_power1 = default_power1[i]; info[i].default_power2 = default_power2[i]; } @@ -4631,6 +4632,7 @@ default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); for (i = 14; i < spec->num_channels; i++) { + info[i].max_power = MAX_A_TXPOWER; info[i].default_power1 = default_power1[i]; info[i].default_power2 = default_power2[i]; } -- Tobias PGP: http://8ef7ddba.uguu.de _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
