On 12.03.2012 15:46, Florian Fainelli wrote:
Hello,
Le 03/12/12 14:45, Daniel Petre a écrit :
thanks! i guess i will use a multimeter to measure who is RX and TX
tonight :)
thank you both, i have some pl2303 usb adapters , im gonna have some
fun tonight :)
I you have a level shifter with separated TX/RX there are just two
combinations to try, and it's not like you will burn your
level-shifter now that the VCC and GND pins are known ;)
On 12.03.2012 15:42, Mikko Hissa wrote:
No, the first one is VCC and the second one is GND.
d...@ip6.ro kirjoitti 12.3.2012 kello 15.37:
hello,
apologies for the slightly offtopic,
im trying to solder a serial to dlink dir615 h1 revision
and i was wondering if anyone got it right?
attached is the pic, i guess the left most is the GND and the two
on
the right are RX and TX ?
thanks!
<dir615-h1_serial.jpg>_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
