> AP94 (ar7100) U-boot 0.0.12 > DRAM: b8050000: 0xc0140180 > 32 MB > Top of RAM usable for U-Boot at: 82000000 > Reserving 4308k for U-Boot at: 81bc8000 > Reserving 192k for malloc() at: 81b98000 > Reserving 44 Bytes for Board Info at: 81b97fd4 > Reserving 36 Bytes for Global Data at: 81b97fb0 > Reserving 128k for boot params() at: 81b77fb0 > Stack Pointer at: 81b77f98 > Now running in RAM - U-Boot at: 81bc8000 > id read 0x100000ff > flash size 8MB, sector count = 128 > Flash: 8 MB > BOARD IS NOT CALIBRATED!!! > In: serial > Out: serial > Err: serial > ...... > Kernel command line: console=ttyS0,115200 board=WRT400N board=WRT400N > root=31:03 rootfstype=squashfs,jffs2 noinitrd > ....... > > Node at 0x00000ea4 with length 0x00000685 would run over the end of the > erase block > Perhaps the file system was created with the wrong erase size? > jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000eac: > 0x1ed6 instead > jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000ec0: > 0x0006 instead > jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000ec4: > 0x4ddd instead >
hi, post a full bootlog please .... blogic _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
