Hi, >> I also looked up at those arcadyan board configs, and some of them have >> XXXXXXXX_EBU addess and XXXXXXXX_USB pin defined. >> I know that on this router usb power is on gpio 29( gpl source says that ) > > So you'll have to define it for your board in the call to xway_register_dwc > (mach-arv45xx.c). >
if it was 29 on ifxmips/ it will be 29 on lantiq/. only the stp and ebu gpios were mapped to new offsets. the first 32 gpios stayed the same. can oyu make a photograph of the pcb ? after seeing a photo i can tell you if the unit has stp or ebu gpios >> Also this board doesn't have wlan eeprom, instead it is read by a wlan >> driver from a file inside fw. If someone has some answers on how to modify >> current ath5k driver, would like to know. in a file inside the FS or in a sector on the flash ? thanks, John _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
