On 04/10/2011 07:26 AM, Jonas Gorski wrote: > Since 2.6.38 b43 has initial working support for the earlier N-PHYs > (namely BCM4321 and BCM4322), I thought it would be nice to be able to use > it in OpenWrt. > > These patches add a new firmware version needed for BCM4322 ucode, add > additional options to kmod-b43 (PIO and debug), and finally make N-PHY > support available (all three default to n). > > The support is still quite limited, neither WEP nor no encryption seems > to work (at least for me), and I had to use PIO mode to get my BCM4321 to > actually work (with PIO mode it seems to work fine, though). BCM4322 > support is untested. > > Also there is no support for actual 11n, and on the TX side it is afaik > limited to 11M. RX should work with up to 54M. > > Jonas Gorski (4): > mac80211: b43: Add Firmware 5.10.56.27 > mac80211: b43: Expose debug option > mac80211: b43: Expose PIO mode fallback > mac80211: b43: Expose N-PHY support > > package/mac80211/Makefile | 70 > +++++++++++++++++++++-- > package/mac80211/files/host_bin/b43-fwsquash.py | 3 + > package/mac80211/patches/810-b43_no_pio.patch | 30 ++++++---- > 3 files changed, 84 insertions(+), 19 deletions(-) > Hi,
Thank you for the patches. They are committed in r26733, r26734, r26735 and r26736. In [RFC 1/4] mac80211: b43: Add Firmware 5.10.56.27 the title was changed to contain the driver and the firmware version. Hauke _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
