Included patch adds support for the TP-link WA901ND-v2. I have yet to
map out the leds and buttons, but I don't anticipate having much
problem with that. I'll push that patch through once I get it done.
This patch also adds an init script to the ar71xx platform. It checks
to see if it is running on a wa901ndv2 and brings up the ethernet port
if it is. There may be a better way to reset that phy chip, but this
is the best I've found.
Cheers,
Signed off by: Jonathan Bennett <jbscienc...@gmail.com>
Index: target/linux/ar71xx/config-2.6.36
===================================================================
--- target/linux/ar71xx/config-2.6.36 (revision 25332)
+++ target/linux/ar71xx/config-2.6.36 (working copy)
@@ -33,6 +33,7 @@
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_MR3X20=y
CONFIG_AR71XX_MACH_TL_WA901ND=y
+CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
Index: target/linux/ar71xx/config-2.6.37
===================================================================
--- target/linux/ar71xx/config-2.6.37 (revision 25332)
+++ target/linux/ar71xx/config-2.6.37 (working copy)
@@ -33,6 +33,7 @@
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_MR3X20=y
CONFIG_AR71XX_MACH_TL_WA901ND=y
+CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
Index: target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/Makefile (revision 25332)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/Makefile (working copy)
@@ -48,6 +48,7 @@
obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o
obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o
obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o
+obj-$(CONFIG_AR71XX_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o
Index: target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h (revision 25332)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h (working copy)
@@ -42,6 +42,7 @@
AR71XX_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
AR71XX_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
+ AR71XX_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
Index: target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd-v2.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd-v2.c
(revision 0)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd-v2.c
(revision 0)
@@ -0,0 +1,127 @@
+/*
+ * TP-LINK TL-WA901ND board support
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juh...@openwrt.org>
+ * Copyright (C) 2010 Pieter Hollants <pie...@hollants.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-ar913x-wmac.h"
+
+#define TL_WA901ND_GPIO_LED_QSS 0
+#define TL_WA901ND_GPIO_LED_SYSTEM 1
+
+#define TL_WA901ND_GPIO_BTN_RESET 11
+#define TL_WA901ND_GPIO_BTN_QSS 12
+
+#define TL_WA901ND_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wa901nd_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x160000,
+ .size = 0x290000,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x3d0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wa901nd_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = tl_wa901nd_partitions,
+ .nr_parts = ARRAY_SIZE(tl_wa901nd_partitions),
+#endif
+};
+
+static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
+ {
+ .name = "tl-wa901nd:green:system",
+ .gpio = TL_WA901ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tl-wa901nd:green:qss",
+ .gpio = TL_WA901ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button tl_wa901nd_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 3,
+ .gpio = TL_WA901ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 3,
+ .gpio = TL_WA901ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wa901nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_data.phy_mask = 0xffffffff; /* I don't really
know the correct value here.
+ * This selects any present phy.
+ */
+ ar71xx_add_device_mdio(0x0);
+
+ ar71xx_add_device_eth(0);
+
+ ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
+ tl_wa901nd_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, TL_WA901ND_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_gpio_buttons),
+ tl_wa901nd_gpio_buttons);
+
+ ar913x_add_device_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", "TP-LINK
TL-WA901ND v2",
+ tl_wa901nd_setup);
Index: target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig (revision 25332)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig (working copy)
@@ -209,6 +209,14 @@
select AR71XX_DEV_LEDS_GPIO
default n
+config AR71XX_MACH_TL_WA901ND_V2
+ bool "TP-LINK TL-WA901ND v2 support"
+ select AR71XX_DEV_M25P80
+ select AR71XX_DEV_AR913X_WMAC
+ select AR71XX_DEV_GPIO_BUTTONS
+ select AR71XX_DEV_LEDS_GPIO
+ default n
+
config AR71XX_MACH_TL_WR741ND
bool "TP-LINK TL-WR741ND support"
select AR71XX_DEV_M25P80
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile (revision 25332)
+++ target/linux/ar71xx/image/Makefile (working copy)
@@ -592,6 +592,10 @@
$(call
Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wa901nd-v1,board=TL-WA901ND,TL-WA901NDv1)
endef
+define Image/Build/Profile/TLWA901NDV2
+ $(call
Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wa901nd-v2,board=TL-WA901ND-v2,TL-WA901NDv2)
+endef
+
define Image/Build/Profile/TLWR741NDV1
$(call
Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr741nd-v1,board=TL-WR741ND,TL-WR741NDv1)
endef
@@ -689,6 +693,7 @@
$(call Image/Build/Profile/TLMR3220V1,$(1))
$(call Image/Build/Profile/TLMR3420V1,$(1))
$(call Image/Build/Profile/TLWA901NDV1,$(1))
+ $(call Image/Build/Profile/TLWA901NDV2,$(1))
$(call Image/Build/Profile/TLWR741NDV1,$(1))
$(call Image/Build/Profile/TLWR740NV1,$(1))
$(call Image/Build/Profile/TLWR841NV15,$(1))
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh (revision 25332)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh (working copy)
@@ -112,6 +112,9 @@
*TL-WA901ND)
name="tl-wa901nd"
;;
+ *"TL-WA901ND v2")
+ name="tl-wa901nd-v2"
+ ;;
*TL-WR741ND)
name="tl-wr741nd"
;;
Index: target/linux/ar71xx/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh (revision 25332)
+++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh (working copy)
@@ -76,7 +76,7 @@
}
return 0
;;
- tl-mr3220 | tl-mr3420 | tl-wa901nd | tl-wr741nd | tl-wr841n-v1 |
tl-wr941nd | tl-wr1043nd)
+ tl-mr3220 | tl-mr3420 | tl-wa901nd | tl-wa901nd-v2 | tl-wr741nd |
tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
[ "$magic" != "0100" ] && {
echo "Invalid image type."
return 1
Index: target/linux/ar71xx/base-files/etc/defconfig/tl-wa901nd-v2/network
===================================================================
--- target/linux/ar71xx/base-files/etc/defconfig/tl-wa901nd-v2/network
(revision
0)
+++ target/linux/ar71xx/base-files/etc/defconfig/tl-wa901nd-v2/network
(revision
0)
@@ -0,0 +1,11 @@
+config 'interface' 'loopback'
+ option 'ifname' 'lo'
+ option 'proto' 'static'
+ option 'ipaddr' '127.0.0.1'
+ option 'netmask' '255.0.0.0'
+
+config 'interface' 'eth'
+ option 'ifname' 'eth0'
+ option 'proto' 'static'
+ option 'ipaddr' '192.168.1.1'
+ option 'netmask' '255.255.255.0'
Index: target/linux/ar71xx/base-files/etc/init.d/eth_fixup
===================================================================
--- target/linux/ar71xx/base-files/etc/init.d/eth_fixup (revision 0)
+++ target/linux/ar71xx/base-files/etc/init.d/eth_fixup (revision 0)
@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+# (C) 2008 openwrt.org
+
+START=35
+
+boot() {
+ . /lib/ar71xx.sh
+ [ $(ar71xx_board_name) = "tl-wa901nd-v2" ] && mii-tool -R
+ /* The TP-link WA901ND V2 requires a hardware reset of
+ * its ethernet port before it will connect.
+ */
+}
+
Property changes on: target/linux/ar71xx/base-files/etc/init.d/eth_fixup
___________________________________________________________________
Added: svn:executable
+ *
Index: target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- target/linux/ar71xx/base-files/etc/diag.sh (revision 25332)
+++ target/linux/ar71xx/base-files/etc/diag.sh (working copy)
@@ -90,6 +90,9 @@
tl-wa901nd)
status_led="tl-wa901nd:green:system"
;;
+ tl-wa901nd-v2)
+ status_led="tl-wa901nd:green:system"
+ ;;
tl-wr1043nd)
status_led="tl-wr1043nd:green:system"
;;
Index: target/linux/ar71xx/config-2.6.32
===================================================================
--- target/linux/ar71xx/config-2.6.32 (revision 25332)
+++ target/linux/ar71xx/config-2.6.32 (working copy)
@@ -37,6 +37,7 @@
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_MR3X20=y
CONFIG_AR71XX_MACH_TL_WA901ND=y
+CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
Index: target/linux/ar71xx/generic/profiles/tp-link.mk
===================================================================
--- target/linux/ar71xx/generic/profiles/tp-link.mk (revision 25332)
+++ target/linux/ar71xx/generic/profiles/tp-link.mk (working copy)
@@ -38,6 +38,17 @@
$(eval $(call Profile,TLWA901NDV1))
+define Profile/TLWA901NDV2
+ NAME:=TP-LINK TL-WA901ND v2
+ PACKAGES:=kmod-ath9k wpad-mini mii-tool
+endef
+
+define Profile/TLWA901NDV2/Description
+ Package set optimized for the TP-LINK TL-WA901ND v2.
+endef
+
+$(eval $(call Profile,TLWA901NDV2))
+
define Profile/TLWR741NDV1
NAME:=TP-LINK TL-WR741ND v1
PACKAGES:=kmod-ath9k wpad-mini
Index: tools/firmware-utils/src/mktplinkfw.c
===================================================================
--- tools/firmware-utils/src/mktplinkfw.c (revision 25332)
+++ tools/firmware-utils/src/mktplinkfw.c (working copy)
@@ -36,6 +36,7 @@
#define HWID_TL_MR3220_V1 0x32200001
#define HWID_TL_MR3420_V1 0x34200001
#define HWID_TL_WA901ND_V1 0x09010001
+#define HWID_TL_WA901ND_V2 0x09010002
#define HWID_TL_WR741ND_V1 0x07410001
#define HWID_TL_WR740N_V1 0x07400001
#define HWID_TL_WR841N_V1_5 0x08410002
@@ -144,6 +145,14 @@
.kernel_ep = 0x80060000,
.rootfs_ofs = 0x140000,
}, {
+ .id = "TL-WA901NDv2",
+ .hw_id = HWID_TL_WA901ND_V2,
+ .hw_rev = 1,
+ .fw_max_len = 0x3c0000,
+ .kernel_la = 0x80060000,
+ .kernel_ep = 0x80060000,
+ .rootfs_ofs = 0x140000,
+ }, {
.id = "TL-WR741NDv1",
.hw_id = HWID_TL_WR741ND_V1,
.hw_rev = 1,
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
