I'm working on support for the new version of the WA901ND. TP-link changed nearly every component from version 1. 32 megs of ram proc: AR9132-BC1E ethernet chip: RTL8201CP Wireless AR5416 Flash: 4MB
I've gotten everything working but the Ethernet port. It's a RTL8201CP chip that drives the port. In the stock firmware, obviously, it comes right up. However, in the U-Boot bootloader and in the Openwrt image I transfered across, I can't get the ethernet port to power up. It won't light the link light on a switch, and it won't transfer any data. It does show up in ifconfig, though. I've started working from the TL-WR841ND-V3 binary, built from latest trunk. This router used the same proc and similar hardware. I had to transfer it across the serial line using ymodem. I've managed to bring up the wireless interface and dump the stock rom (/dev/mtd0-4) to a laptop. Sometime tomorrow I'll get these files online. Any ideas on the lan port? I'm assuming it's a lack of the proper driver. Any help or hints are appreciated. Cheers, Jonathan Bennett _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
