Change Log: 2009.05.30 -- Version 2.1_rc17
* Reduce the debug level (--verb) at which received management interface commands are echoed from 7 to 3. Passwords will be filtered. * Fixed race condition in management interface recv code on Windows, where sending a set of several commands to the management interface in quick succession might cause the latter commands in the set to be ignored. * Increased management interface input command buffer size from 256 to 1024 bytes. * Minor tweaks to Windows build system. * Added "redirect-private" option which allows private subnets to be pushed to the client in such a way that they don't accidently obscure critical local addresses such as the DHCP server address and DNS server addresses. * Added 'autolocal' redirect-gateway flag. When enabled, the OpenVPN client will examine the routing table and determine whether (a) the OpenVPN server is reachable via a locally connected interface, or (b) traffic to the server must be forwarded through the default router. Only add a special bypass route for the OpenVPN server if (b) is true. If (a) is true, behave as if the 'local' flag is specified, and do not add a bypass route. The new 'autolocal' flag depends on the non-portable test_local_addr() function in route.c, which is currently only implemented for Windows. The 'autolocal' flag will act as a no-op on platforms that have not yet defined a test_local_addr() function. * Increased TLS_CHANNEL_BUF_SIZE to 2048 from 1024 (this will allow for more option content to be pushed from server to client). * Raised D_MULTI_DROPPED debug level to 4 from 3 to filter out (at debug levels <=3) a common and usually innocuous warning. * Fixed issue of symbol conflicts interfering with Windows CryptoAPI functionality (Alon Bar-Lev). * Fixed bug where the remote_X environmental variables were not being set correctly when the 'local' option is specifed. James
