Thanks for the response. I have both openvswitch and sriovnicswitch mechanism drivers specified. I also have both the NIC Switch Agent and Open vSwitch agent running.
Since this subnet configuration is for the sr-iov network, shouldn't the binding be done by the NIC switch agent? None None^[[00;32m] ^[[01;35m^[[00;32mAttempting to bind port 550a0b5f-35b5-4441-a0ad-5ae60c6b8a94 on network 069a56a1-253d-4d2b-bef9-3c11f454bde2^[[00m ^[[00;33mfrom (pid=204025) bind_port /opt/stack/neutron/neutron/plugins/ml2/drivers/mech_sriov/mech_driver.py:97^[[00m 2015-04-21 14:33:18.759 ^[[00;32mDEBUG neutron.plugins.ml2.drivers.mech_sriov.mech_driver [^[[01;36mreq-e3cd2b74-03f2-4b1a-b514-54119c57ac5d ^[[00;36mNone None^[[00;32m] ^[[01;35m^[[00;32mRefusing to bind due to unsupported vnic_type: normal^[[00m ^[[00;33mfrom (pid=204025) bind_port /opt/stack/neutron/neutron/plugins/ml2/drivers/mech_sriov/mech_driver.py:102^[[00m On Thu, Apr 23, 2015 at 4:19 AM, Moshe Levi <mosh...@mellanox.com> wrote: > The openvswitch agent should be able to bind the port. > > Can you check that you have in ml2 conf > mechaniscm_drivers = openvswitch,sriovnicswitch > > also check that the openvswitch agent is running on your network node. > > > -----Original Message----- > From: jacob jacob [mailto:opstk...@gmail.com] > Sent: Wednesday, April 22, 2015 10:16 PM > To: openstack@lists.openstack.org > Subject: [Openstack] DHCP issues with SR-IOV networking > > Hi, > > I was able to setup SR-IOV passthrough using the following wiki: > https://wiki.openstack.org/wiki/SR-IOV-Passthrough-For-Networking > > Created a neutron network and added subnet with dhcp enabled. > Ports created from this network are bound to VFs as expected. > > But the IP assignment on this network isn't working since the dhcp port bind > isn't successful. > > Attached Device > > ________________________________ > Device Owner network:dhcp > Device ID > dhcp5ce901c9-dac9-5417-8f6f-8e3787eff230-069a56a1-253d-4d2b-bef9-3c11f454bde2 > > Binding > > ________________________________ > Host host1.tst.com > Profile None > VIF Type binding failed > VIF Details None > VNIC Type normal > > > The issue seems to be that the binding is being attempted as nic type normal > instead of direct. > > Would really appreciate any pointers on how to address this problem. > > _______________________________________________ > Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > Post to : openstack@lists.openstack.org > Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack _______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
