The openvswitch agent should be able to bind the port. Can you check that you have in ml2 conf mechaniscm_drivers = openvswitch,sriovnicswitch
also check that the openvswitch agent is running on your network node. -----Original Message----- From: jacob jacob [mailto:opstk...@gmail.com] Sent: Wednesday, April 22, 2015 10:16 PM To: openstack@lists.openstack.org Subject: [Openstack] DHCP issues with SR-IOV networking Hi, I was able to setup SR-IOV passthrough using the following wiki: https://wiki.openstack.org/wiki/SR-IOV-Passthrough-For-Networking Created a neutron network and added subnet with dhcp enabled. Ports created from this network are bound to VFs as expected. But the IP assignment on this network isn't working since the dhcp port bind isn't successful. Attached Device ________________________________ Device Owner network:dhcp Device ID dhcp5ce901c9-dac9-5417-8f6f-8e3787eff230-069a56a1-253d-4d2b-bef9-3c11f454bde2 Binding ________________________________ Host host1.tst.com Profile None VIF Type binding failed VIF Details None VNIC Type normal The issue seems to be that the binding is being attempted as nic type normal instead of direct. Would really appreciate any pointers on how to address this problem. _______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack _______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
