you may want to google about nova-network and neutron. BIG BIG difference. Swift is just an object store. you have br100 which will not work on neutron. Did you do a clean / unstack before you run the new stack.sh?
-- Remo Mattei November 26, 2013 at 10:51:19, John Smith (lbalba...@gmail.com) ha scritto: Hi, So assuming you think the problem is the network, may I ask what logfile and logentry you noticed to make you suspect that ? I modified my localrc with your suggestions. When running stack.sh, I was asked for a swift password, and provided 'password'. (Do I need to set this elsewhere as well ?) Just curious: whats the difference between 'neutron' and 'nova network' ? After making your modifications, glance image creation fails : $ glance image-create --name=cirros-0.3.0-i386 --is-public=true --container-format=bare --disk-format=qcow2 < cirros-0.3.0-i386-disk.img Request returned failure status. 400 Bad Request Client disconnected before sending all data to backend (HTTP 400) And just in case its relevant, here's the output of 'ifconfig -a' $ ifconfig -a br100: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::6cf3:5bff:fe8d:5525 prefixlen 64 scopeid 0x20<link> ether 6e:f3:5b:8d:55:25 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 6 bytes 468 (468.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 br-ex: flags=67<UP,BROADCAST,RUNNING> mtu 1500 inet 172.24.4.225 netmask 255.255.255.240 broadcast 0.0.0.0 ether 4e:01:47:ef:50:4e txqueuelen 0 (Ethernet) RX packets 10 bytes 776 (776.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1 bytes 90 (90.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 br-int: flags=67<UP,BROADCAST,RUNNING> mtu 1500 inet6 fe80::4c4:27ff:feef:a08d prefixlen 64 scopeid 0x20<link> ether 9e:6c:79:69:44:44 txqueuelen 0 (Ethernet) RX packets 21 bytes 1622 (1.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 6 bytes 468 (468.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 0 (Local Loopback) RX packets 231252 bytes 210037500 (200.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 231252 bytes 210037500 (200.3 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ovs-system: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 82:71:ba:06:cf:46 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 p3p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.126.142 netmask 255.255.255.0 broadcast 192.168.126.255 inet6 fe80::20c:29ff:fe6e:32be prefixlen 64 scopeid 0x20<link> ether 00:0c:29:6e:32:be txqueuelen 1000 (Ethernet) RX packets 88561 bytes 61914618 (59.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 103321 bytes 15179500 (14.4 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 base 0x2000 virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 06:09:53:bb:c9:28 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Regards, John Smith. On Tue, Nov 26, 2013 at 7:08 PM, Remo Mattei <r...@mattei.org> wrote: > I look through the logs and I would suggest to add neutron and not to use > nova network. > > so here is the one I use. > > add this below your PASSWORD and TOKEN options > > disable_service n-net > enable_service q-svc > enable_service q-agt > enable_service q-dhcp > enable_service q-lbaas > enable_service q-l3 > enable_service q-meta > enable_service neutron > # Optional, to enable tempest configuration as part of devstack > enable_service tempest > enable_service s-proxy s-object s-container s-account > enable_service heat h-api h-api-cfn h-api-cw h-eng > #enable_service n-cell > SCREEN_LOGDIR=$DEST/logs/screen > > > let me know > > > -- > Remo Mattei > > _______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack !DSPAM:2,5294ee6b70891476013080!
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
