Hi,
I dit not update my ceph client. The version before and after is:
# ceph -v
ceph version 0.87 (c51c8f9d80fa4e0168aa52685b8de40e42758578)
Apart from checking my qemu-kvm version and having shutdown/up my
instances, any ideas on how to validate that my host is no longer
vulnerable?
Regards,
Cynthia
2015-06-04 16:59 GMT+02:00 Fox, Kevin M <kevin....@pnnl.gov>:
> For the record, what version of ceph are you using before and after?
>
> Thanks,
> Kevin
>
> ------------------------------
> *From:* Cynthia Lopes
> *Sent:* Thursday, June 04, 2015 1:27:53 AM
> *To:* Steve Gordon
> *Cc:* OpenStack Operations Mailing List
> *Subject:* Re: [Openstack-operators] Venom vulnerability
>
> Hi guys,
>
> Just for feedback and if somebody else has compute nodes on CentOS 7.0,
> IceHouse and uses Ceph.
>
>
>
> ----------------------------------------------------------
> What I did that worked for me:
> ----------------------------------------------------------
>
>
>
> #Remove all QEMU and Livirt related RPMs. I had recompiled QEMU for RBD
> and Libvirt that I had was not compatible with the patched QEMU.
> #This removes openstack-nova-compute and so on, be careful...
> yum remove -y `rpm -qa | grep qemu`
> yum remove -y `rpm -qa | grep libvirt`
>
> #I updated base and update centos repositories to gether from most up to
> date versions. I have local repositories, so the commands should be
> adapted...
> sed -i "s|/centos7|/centos7.1|g" CentOS-Base7.repo
> sed -i "s|/centos7update|/centos7.1update|g" CentOS-Base7.repo
>
> #I had to do an update...
> yum clean all
> yum -y update #check problem only with ceph... I had some dependencies
> problems with the ceph packages. But just Ceph
>
> yum -y update --skip-broken #but ignoring them worked just fine
>
> cd /etc/yum.repos.d/
> #The update added all these repos on my yum.repos.d so I deleted
> (because I use local repositories)
> rm -f CentOS-Base.repo CentOS-Debuginfo.repo CentOS-fasttrack.repo
> CentOS-Sources.repo CentOS-Vault.repo
>
> #Then I re-installed QEMU and Libvirt with CentOS7.1 repositories (base
> and update)
> yum -y install kvm qemu-kvm python-virtinst libvirt libvirt-python
> virt-manager libguestfs-tools
> service libvirtd start
>
> #I use puppet to configure my host, so I just re-run it to re-install
> nova-compute and re-configure
> puppet agent -t #so replace this with your procedure for configure your
> compute node
>
> service openstack-nova-compute status #chek nova-compute is running...
>
> #I had a console.log file in the instances directory that became owned
> by root. So be sure to have everything owned by nova
> chown -R nova:nova /var/lib/nova/
>
> #Of course, at this moment all my instances were shutoff, so just
> restart them...
>
>
> source keystonerc* #credentials
>
> vms=`nova list --all-tenants --minimal --host $host | grep -v ID | grep
> -v "+-" | awk '{print $2}'` #guest vms ids on the host...
>
> for vm in $vms ; do nova start $vm; done #start vms...
>
>
>
>
> --------------------------------------------------------
> Hope this might be useful for someone...
>
> Regards,
> Cynthia Lopes do Sacramento
>
> 2015-06-03 2:35 GMT+02:00 Steve Gordon <sgor...@redhat.com>:
>
>> ----- Original Message -----
>> > From: "Erik McCormick" <emccorm...@cirrusseven.com>
>> > To: "Tim Bell" <tim.b...@cern.ch>
>> >
>> > On Tue, Jun 2, 2015 at 5:34 AM, Tim Bell <tim.b...@cern.ch> wrote:
>> >
>> > > I had understood that CentOS 7.1 qemu-kvm has RBD support built-in.
>> It
>> > > was not there on 7.0 but http://tracker.ceph.com/issues/10480
>> implies it
>> > > is in 7.1.
>> > >
>> > >
>> > >
>> > > You could check on the centos mailing lists to be sure.
>> > >
>> > >
>> > >
>> > > Tim
>> > >
>> > >
>> > It's about time! Thanks for the pointer Tim.
>> >
>> > Cynthia, If for some reason it's not in the Centos ones yet, I've been
>> > using the RHEV SRPMs and building the packages. You don't have to mess
>> with
>> > the spec or anything. Just run them through rpmbuild and push them out.
>> >
>> >
>> http://ftp.redhat.com/pub/redhat/linux/enterprise/7Server/en/RHEV/SRPMS/
>> >
>> > -Erik
>>
>> FWIW equivalents builds for use with oVirt, RDO, etc. are being created
>> under the auspices of the CentOS Virt SIG:
>>
>>
>> http://cbs.centos.org/repos/virt7-kvm-common-testing/x86_64/os/Packages/
>>
>> Thanks,
>>
>> Steve
>>
>> _______________________________________________
>> OpenStack-operators mailing list
>> OpenStack-operators@lists.openstack.org
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
>>
>
>
_______________________________________________
OpenStack-operators mailing list
OpenStack-operators@lists.openstack.org
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
