Hi, We are trying test environment deployment with OpenStack-ansible pike release. After executing setup-hosts.yaml, the lxc-containers were created. We have an issue while doing *apt-get update *in infra-repo-container as it couldn't connect to the proxy server. The strange thing is that the infra-repo-container is not showing ip on any interface when checked with *ip r*.
Could you please help us with this issue. Below are some logs on the container and on the host. E: Failed to fetch http://security.ubuntu.com/ubuntu/dists/xenial-security/ main/binary-amd64/Packages Something wicked happened resolving 'xx.xx.xx.xx :8080 <http://10.51.40.88:8080>' (-9 - Address family for hostname not supported) root@infra1-repo-container-a7a137c4:/# ping xx.xx.xx.xx (proxy server) connect: Network is unreachable *On Container*: root@infra1-repo-container-a7a137c4:/# cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # LXC interface, this is ALWAYS assumed to be DHCP. auto eth0 iface eth0 inet dhcp # Load any additional configs source /etc/network/interfaces.d/*.cfg root@infra1-repo-container-a7a137c4:/# cat /etc/network/interfaces.d/ eth1.cfg # Ansible managed ### start generated network for [ eth1 ] ### auto eth1 iface eth1 inet static address 192.168.124.126 netmask 255.255.255.0 mtu 1500 post-up sysctl -w net.ipv4.conf.$IFACE.arp_notify=1 post-up ip link set $IFACE address $(cat /sys/class/net/$IFACE/address) ### end generated network for [ eth1 ] ### root@infra1-repo-container-a7a137c4:/# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface *On host:* root@ubuntu:/home/ansible# ifconfig lxcbr0 lxcbr0 Link encap:Ethernet HWaddr fe:02:f2:ff:bd:86 inet addr:10.0.3.1 Bcast:10.0.3.255 Mask:255.255.255.0 inet6 addr: fe80::a085:76ff:febb:401d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:691 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:181224 (181.2 KB) TX bytes:828 (828.0 B) root@ubuntu:/home/ansible# ip r default via 192.168.124.1 dev eno1 10.0.3.0/24 dev lxcbr0 proto kernel scope link src 10.0.3.1 192.168.124.0/24 dev eno1 proto kernel scope link src 192.168.124.28 192.168.124.0/24 dev br-mgmt proto kernel scope link src 192.168.124.28 Thanks in advance... -- Thanks !!! Goutham Pratapa
__________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
