Hi, We are trying test environment deployment with openstack-ansible pike release. After executing setup-hosts.yaml, the lxc-containers were created. We have an issue while doing apt-get update in infra-repo-container as it couldn't connect to the proxy server. The strange this is that the infra-repo-container is not showing ip on any interface when checked with ip r. Could you please help us with this issue. Below are some logs on the container and on the host.
E: Failed to fetch http://security.ubuntu.com/ubuntu/dists/xenial-security/main/binary-amd64/Packages Something wicked happened resolving '10.51.40.88:8080' (-9 - Address family for hostname not supported) root@infra1-repo-container-a7a137c4:/# ping 10.51.40.88 (proxy server) connect: Network is unreachable On Container: root@infra1-repo-container-a7a137c4:/# cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # LXC interface, this is ALWAYS assumed to be DHCP. auto eth0 iface eth0 inet dhcp # Load any additional configs source /etc/network/interfaces.d/*.cfg root@infra1-repo-container-a7a137c4:/# cat /etc/network/interfaces.d/eth1.cfg # Ansible managed ### start generated network for [ eth1 ] ### auto eth1 iface eth1 inet static address 192.168.124.126 netmask 255.255.255.0 mtu 1500 post-up sysctl -w net.ipv4.conf.$IFACE.arp_notify=1 post-up ip link set $IFACE address $(cat /sys/class/net/$IFACE/address) ### end generated network for [ eth1 ] ### root@infra1-repo-container-a7a137c4:/# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface On host: root@ubuntu:/home/ansible# ifconfig lxcbr0 lxcbr0 Link encap:Ethernet HWaddr fe:02:f2:ff:bd:86 inet addr:10.0.3.1 Bcast:10.0.3.255 Mask:255.255.255.0 inet6 addr: fe80::a085:76ff:febb:401d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:691 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:181224 (181.2 KB) TX bytes:828 (828.0 B) root@ubuntu:/home/ansible# ip r default via 192.168.124.1 dev eno1 10.0.3.0/24 dev lxcbr0 proto kernel scope link src 10.0.3.1 192.168.124.0/24 dev eno1 proto kernel scope link src 192.168.124.28 192.168.124.0/24 dev br-mgmt proto kernel scope link src 192.168.124.28 -- Cheers !!! Goutham Pratapa
__________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
