On Thu, Nov 3, 2011 at 4:42 PM, Vaclav Peroutka <vacla...@seznam.cz> wrote:
> I updated FW, but it was rolled back to some older version from Sep 2008.
> Whenever I run JLink commander, I am getting the message about old FW. I run
> updater:
> SEGGER J-Link Commander V4.35h ('?' for help)
> Compiled Sep 27 2011 18:09:42
> Updating firmware: J-Link ARM V8 compiled Sep 22 2011 16:23:23
> Replacing firmware: J-Link ARM V8 compiled Sep 17 2008 21:12:23
> Waiting for new firmware to boot
> New firmware booted successfully
> DLL version V4.35h, compiled Sep 27 2011 18:09:27
> Firmware: J-Link ARM V8 compiled Sep 22 2011 16:23:23
> S/N: 20100214
> Feature(s): RDI,FlashDL,FlashBP,JFlash,GDBFull
> J-Link>
> But then I exit JLink commander, again start it and still, FW version is the
> older one.
4.35h is a beta version, probably you can try the new release version
which is 4.36g.
http://www.segger.com/jlink-software.html
Or you can try to the old version to get OpenOCD to work again.
http://www.segger.com/j-link-older-versions.html
--
Xiaofan
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
