On 10 August 2011 11:15, Steve Bennett <ste...@workware.net.au> wrote: > On 10/08/2011, at 6:39 PM, Spencer Oliver wrote: > >> On 10 August 2011 07:11, Steve Bennett <ste...@workware.net.au> wrote: >>> On 10/08/2011, at 3:03 PM, Xiaofan Chen wrote: >>> >>>> On Wed, Aug 10, 2011 at 11:44 AM, Steve Bennett <ste...@workware.net.au> >>>> wrote: >>>>> On 10/08/2011, at 9:43 AM, Xiaofan Chen wrote: >>>>>> It was not up to date but very close. Anyway, I just updated it and >>>>>> the issue is still there with the release zip file. I will try the git >>>>>> tree later. >>>>>> >>>>>> === configuring in jimtcl >>>>>> (/cygdrive/d/work/openocd/openocd-0.5.0/build_mingw_cr >>>>>> oss/jimtcl) >>>>>> configure: running /bin/sh ../../jimtcl/configure.gnu >>>>>> --disable-option-checking >>>>>> '--prefix=/usr/local' '--build=i686-pc-mingw32' '--enable-jlink' >>>>>> '--enable-ft22 >>>>>> 32_libftdi' 'build_alias=i686-pc-mingw32' --cache-file=/dev/null >>>>>> --srcdir=../../ >>>>>> jimtcl >>>>>> ../../jimtcl/configure: line 3: >>>>>> D:/work/openocd/openocd-0.5.0/jimtcl/autosetup/j >>>>>> : No such file or directory >>>>>> ../../jimtcl/configure: line 3: exec: >>>>>> D:/work/openocd/openocd-0.5.0/jimtcl/autos >>>>>> : cannot execute: No such file or directory >>>>>> configure: error: ../../jimtcl/configure.gnu failed for jimtcl >>>>> >>>>> You have something weird going on there. Note how the lines are truncated. >>>>> For example: >>>>> >>>>>> ../../jimtcl/configure: line 3: >>>>>> D:/work/openocd/openocd-0.5.0/jimtcl/autosetup/j >>>>>> : No such file or directory >>>> >>>> Yes I agree that the error message is quite strange. It is directly copy >>>> and paste from the Cygwin prompt. I will check again. >>>> >>>> The other errors under MinGW are also quite strange. I think I will >>>> try another setup. >>> >>> Let us know how that goes. >>> >>>> >>>>> Or is that your cut and paste of the error messages? >>>>> If so, please add the errors as an attachment instead. >>>>> >>>>> FYI: I build the release tarball on windows/mingw without any problems. >>>> >>>> Glad to know that. As per the previous answer from Spen that >>>> MinGW/Msys is not supported by jimtcl. Is that not true? >>> >>> That is *not* true. >>> The version of jimtcl in openocd-0.5.0 fully supports building on mingw/msys >>> >> >> for me jimtcl has never built under msys since the update. >> log is attached below, for info jimsh0.exe is built ok. >> >> No installed jimsh or tclsh, building local bootstrap jimsh0 >> The system cannot find the path specified. >> autosetup/system.tcl:150: Error: >> in procedure 'use' called at file "auto.def", line 5 >> in procedure 'use' called at file "autosetup/cc.tcl", line 29 >> in procedure 'config_guess' called at file "autosetup/system.tcl", line 150 >> Try: 'configure --debug' for a full stack trace >> configure: error: ./configure.gnu failed for jimtcl > > It is failing while trying to run config.guess. > > What do you get when you run: > > sh jimtcl/autosetup/config.guess >
i686-pc-mingw32 just installed a fresh copy of msys/mingw - still same error. Spen _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
